Resolved! Is it possible to group countries?
I want to be able to use a set of countries for some specific rules. Is there any way to create a group with countries?
I want to be able to use a set of countries for some specific rules. Is there any way to create a group with countries?
Hi Guys,
I have a pair of PA5220s and a Cisco router ASR1001. I want to set up a port channel on the router and then spread the interfaces between 2 PAs. Each interface on the PA is set for virtual wire. I have done port channels between Cisco rout
...
Problems accessing knowledge base
Gentlemen, good afternoon.
I'm having trouble accessing the knowledge base, could you please check?
Thanks
Hello,
I have an openldap server setup as well as an LDAP policy and group mapping on the Palo Alto firewall.
When I run the 'show user group name "cn=employees,ou=groups,dc=brillnet,dc=com". I can see the users in the group just fine. Refer to t
...
We're having some strange SSL/TLS Inspection errors while on GlobalProtect. We are getting unsupported-parameter errors while a user is connected to GlobalProtect trying to get to any internet site, including things like google.com. Doing a packet ca
...
Hello,
I'm a novice so I could use any help, RTFM, just point me in the right direction. I currently having an issue getting to a vendor site, can't ping the website or view the page. But from outside of our organization, it page comes up just fine
...
I have a firewall that for some reason after doing a version update to 11.1 is only taking 2 to 3 min to boot now. I noticed all the logs were not showing up and the interfaces was showing down, but everything was working. I decided to do a factory r
...
My project is to migrate 2 pairs of Forcepoint firewall to PA-440.
I have a Forcepoint config in XML. I
It is like to like migration without any changes.
How do I move forward with it ?
Can an IP be submitted to Palo Alto to be included in the high-risk or known-malicious IP address lists? We have an IP that has been discovered to be a major DDOS attack BOT coordination point but it's not listed in PAN's threat vault and is not bein
...
I have a really funny issue here.
I have panorama for managing all my firewalls, spread across the world.
I did a change for our London firewalls and hit "push and commit" on panorama.
The queue shows 0% progress, I waited half an hour, restarted pan
Hi,
my PA220 interfaces were down due to internet connection is down. As the internet connection was up, the interfaces also showing UP. Why is this happening. is there any settings for this to check.
Am confused by the amount of training available online. basically i want to get pcnse certification as fast as possible. how to do?
i read that for best practice if we make custom url category its action should be none for security reasons
need to understand why?
Subject | Likes |
---|---|
5 Likes | |
4 Likes | |
3 Likes | |
3 Likes | |
3 Likes |
User | Likes Count |
---|---|
10 | |
8 | |
7 | |
5 | |
5 |