Producing an application usage graph?

Is there a way to produce a graph of the usage of a particular application?

Bytes or sessions would be acceptable, I just want to be able to show a rough usage trend over the course of a day/week.

Thanks.

Are access domains still relevant??

With user roles, Admin Roles, vsys access profiles, are access domains still relevant?

Where would I use them over the other methods?

Getting crazy with Ipsec-tunnel

Hello everyone,

i'm trying a couple of days to establish an IPsec-tunnel to my amazon VPC with our PA-500.

I can do what ever i want the tunnel will not get up. The log file said:

2011-10-31 14:11:06 [DEBUG]: ikev1.c:1427:isakmp_ph1resend(): resend phas

How to configure a Cisco ASA behind PA2050 with public IP

Greetings,

I'm trying to figure out how to configure our PA2050 to point one of our public IPs in a /25 block to a Cisco ASA 5510 behind it. We're using both the PA's SSL VPN and the ASA's SSL VPN so I'd like to plug the ASA into port 2 on the PA2050

App Scope Times Wrong

I upgraded our PAN-500 to 4.01 today and now all of the times in the App Scope Monitors (Network, Threat, etc) are off by 4 hours.  The Log times are all correct.

For instance, it is now 18:22 according to the Device page on the PAN (which is correct)

Per host QoS

Hi there.

I've played with different QoS setups. And currently I'm trying to set up a per host based QoS or BW shaping.

My QoS profile is as following:

Class 3, Min BW: 2Mb/s MaxBW:3Mb/s

Class 4, Min BW: 1Mb/s MaxBW:2Mb/s

QoS policy is:

#1 SrcZone: Inside,

Auto-enable youtube safety mode?

We are looking at opening up YouTube to our general user base, but do not want to push out a policy that would enable safety mode. I'd like to have a URL filtering continue and override page where the user could click on the continue button, which wo

issues accessing urls even though whitelisted

Hi,

I am having problems troubleshoot access to http://www.stockbrokers.barclays.co.uk/ when i try to login,(https://www.stockbrokers.barclays.co.uk/idv/Login1.asp?category=&usecase=login&popup=&)

I have allowed *.barclays.* on the url filtering profil

dns-proxy static entry lost

I've got a PA-5050 running version 4.0.6.

I'm using the dns-proxy to resolve a single address from my wireless guest network access.  It works fine for days, then sometimes just stops working.

Under Network >> DNS Proxy the entry is listed and enabled,

H.225 Content Inspection

I am having a problem with VOIP communications passing through my PA-4020's. The PA is recognising the H.225 application, however it would appear that the content inspection is not translating the IP addresses within the application payload,  I do h

Edinburgh - pbf + zone lookup snafus

Hi,

I'm seeing the following.

Consider:

- two existing Internet lines, put in zones "I-1" and "I-2"

- there are two L3 interfaces, one in I-1 with address PA-1, one in I-2 with address PA-2

- the default route goes to a router reachable in I-2

- there's a

Commit failed due to Application update

After an auto update of application we can't do a commit with out explanation on the commit page.

We discover that when we do a revert of application the commit is ok so we put off the auto update but we want it back.

How could we solve this problem ?

SNMP V3 Configuration

I notice that there is no example or detail descriptions for configuration of SNMPv3.  Here is my configuration which works but I never got the include/exclude mask to work.  If someone else have an example or recommendations please upload.

set device

CPU

I would like to know that If I observe from Throughput and Session is not exceed the maximum number that box can support. What cause that may make CPU performance overload? Please kindly share idea.

Note. My box is PA2050. Thoughput is around 400Mbps