LLDP Unsupported / Unkown TLV types

Hey Community!

I have my PA5200 series attached to Cisco ACI switches and it seems that some of the LLDP TLV options that the Cisco switches advertise - are either not understood/not supported on the Palo.

Is there a way I can supress the log output

palo alto home version

Anyone know if there is palo alto home version? thanks

QoS upload problem (300Mb ghost limit)

Good morning everyone.

I am writing to ask for help regarding the QoS configuration to manage upload bandwidth.

Situation:

2 PA-460 installed inside a school (12 branches), with 2 external interfaces (eth1/7 ⇒ ADSL, eth1/8 ⇒ MPLS) and 2 internal in

Cortex Connection Lost

Hello everyone,

I'm currently conducting a survey on the various possibilities that could lead to the "Connection Lost" issue in the environment. I encourage all of you to participate in this survey. Additionally, I have a question: In the event that

GlobalProtect authentication blocked by home firewall

I use GlobalProtect to connect to my employer's network from my home Wifi.

However, the GP authentication requires port 8443, and this is not compatible with maintaining the highest security firewall settings on my Xfinity Gateway.     Every time I c

Compare between template and a template stack

I have a FW1_template-stack and FW1_template. I know the template-stack has its own config separate  from a template FW. Is there  away to audit compare both ?  I am trying to move all config to FW1_template  and leave template-stack as plain vanilla

VPN error message after upgrading PAN-OS to 10.1.10-h2

Hi,

After upgrading to firewall PANOS version to 10.1.10-h2 i started seeing below error message logs under monitor > system logs. On the previous PAN-OS version this error was not observed.

However, in reality tunnel is up & running, only thing on

Yealink voip phone Busy Lamp Field

I have a palo alto 220 on OS 10.1 and recently put in yealink phones that access the phone servers through our ISP. Everything works except for a function called 

Busy Lamp Field (BLF)

BLF is an acronym for Busy Lamp Field, which is a light on an IP

NAT Leak Issue

Hi All,

Been troubleshooting an issue with viewing live streams from cameras from one specific location.  We've had the system in place for awhile and it was working fine until recently.  Any time we try to establish a connection over tcp 960, it was

password saved in firewall

Hi Team,

We are migrating firewalls from one environment to another; in the other environment, we will create a new firewall, and that firewall will be managed by panaroma. What we are going to do is copy the named configuration export from old and i

PA220 device stuck at booting state after reboot

Hi Team,

My PA220 device stuck at booting state and unable to boot up.

State light showing Orange color. Is that hardware failure?

Or is that anything that I can check on?

Certificate Expiry

Hi Team,

May i know how to set the certificate expiry alerts to emails or any other option to get alerts on certificate expiry?

Forward trust certificate used for SSL Decryption i need to get alerts for, so please suggest.

Regards,

Sanjay S