05-02-2024 08:53 PM - edited 05-02-2024 11:07 PM
Hi Guys,
Need your help, as I cannot figured out what's wrong with my configuration. Both side of my Phase 1 are working fine but when it comes to Phase 2 connection is not complete. Any idea how to fix this issue?
Here is my AWS PAN configuration. Please note that my local IP is a private IP address which is I think due to being a VM PAN but I associate it an Elastic IP address. But when I used the elastic ip address as a local ip address ike status got down.
Thank you in advance for your assistance.
05-03-2024 05:58 AM - edited 05-03-2024 06:00 AM
Generate traffic on AWS side and then check System logs on Palo.
You can use filter below to see only VPN events.
( subtype eq vpn)
Do you have NAT-T enabled on IKE gateway? (IP on your side is not public IP).
Does it work if you delete proxy id's on Palo side?
05-05-2024 11:28 PM
Hi,
I already resolved the issue. Anyway, thanks for the response.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
