PA 440 just stopped working
I have a 2 PA 440 os 10.2.7 at two completely different locations and suddenly stopped working. I don't see any advisories out, anyone else seeing this recently
I have a 2 PA 440 os 10.2.7 at two completely different locations and suddenly stopped working. I don't see any advisories out, anyone else seeing this recently
Hello everyone.
Do you know if it is possible to monitor with SNMP all the links of each branch connected to sdwan? With the PANOS 10.1 or 10.2 version.
Regards,
Share the upgrade path from 9.1.13-h1 to latest
Hello team,
This is my first time here. I have two palo alto to replace and i need to find out the current bandwidth get used on the site,
Is there a specific command on the cli or GUI i can find out what bandwidth get used on the site please?
Hi Team,
We are facing issues with the M365 via prisma. If we bypass prisma it feels better to access. If it is via Prisma it is pretty slow. Any suggestions on how to troubleshoot this issue.
Regards,
Sanjay S
Hello,
Got a strange one, that I am hoping someone with deep knowledge of PBF and symmetric return can advise on.
We have two (2) virtual-routers due to two different ISPs. The history of it is we are migrating off of one ISP to finally decommis
...
Hi Everyone
We recently implemented Advanced URL filtering at our University, one of the categories we have blocked is Newly-Registered-Domains, we created a custom URL group and implemented dynamic lists for the infosec team to add exceptions and
...
Hello Guys,
I have a project to replace palo alto with another two palos they are configured as HA and i want to get all the cli commands in one go and past it into the new firewalls ? will that work?
who knows what is the command that we could do
...
The user was trying to access the Proofpoint links it is not accessible in the firewall. We could see the action is reset both in monitoring and a session end reason is policy-deny and checked the threat logs but we couldn't see any logs in the threa
...
Hi team,
While configuring PanOS SD-WAN, I successfully added the firewalls as managed devices to Panorama and installed the SD-WAN plugin version 3.1.2. Subsequently, I included the devices in the SD-WAN configuration, activated BGP policy for autom
...
The customer found that some traffic logs have extremely large bytes, reaching 281.5T,
Looking at the log details, it was found that:
Question 1:
Details:
Type end
Bytes 281474976579754 ---- I think this is an incorrect display?
Bytes Received
...
When you want to allow the linkedin-base application with a specific Security Policy Rule, for example Linkedin-Rule, the Implicit applications it depends to are automatically allowed by the firewall, this means that the Security Policy Rule Linkedin
...
An IT Auditor stated that SNMP is listening through the firewall for a specific Public IP Address.
I have been filtering the network traffic on the PaloAlto 3020 for that specific IP address and also filtering with port 161. BUt Id not see any res
...
Hi folks,
Have been seeing a lot of "'Client and decrypt profile version mismatch. Supported client version bitmask: 0x08. Supported decrypt profile version bitmask: 0x60. ' errors in the log lately. This article:
https://docs.paloaltonetworks.com/
...
Good Morning!
I am not seeing any network activity in the ACC tab for my 450. I've cleared all filters just in case, restarted the management plane, I even failed over to see if it was isolated to the one unit. Both are showing this. When I set the
...User | Likes Count |
---|---|
4 | |
2 | |
2 | |
2 | |
2 |