topic Re: Unable to Upgrade PAN OS to 9.1.13-h3 from 9.1.11-h3- Error: findfs: unable to resolve 'LABEL... in AIOps for NGFW Discussions

Unable to Upgrade PAN OS to 9.1.13-h3 from 9.1.11-h3- Error: findfs: unable to resolve 'LABEL=sysroot0'

Shakemustafa — Wed, 25 May 2022 13:39:41 GMT

We are trying to upgrade the PAN-OS of PA-850 to 9.1.13-h3 from 9.1.11-h3. initially when clicking on install getting an error as "The software manager is currently in use. Please try again later". then we have run the command "debug swm unlock" in CLI.

After that when trying to install get an error as "Error: findfs: unable to resolve 'LABEL=sysroot0' ". when I have tried to view the "debug swm status" its showing as "server error: Failed to execute the command". Even i have tried to install PAN-OS from CLI still get the same error. i have tested by restarting the management server but still getting the same error.

After checking some live community discussions, found we need to do a factory reset. But we are unable to do that, as the firewall is at a remote location so its difficult to get console access.

Please suggest if any workarounds.

Re: Unable to Upgrade PAN OS to 9.1.13-h3 from 9.1.11-h3- Error: findfs: unable to resolve 'LABEL...

kryadav — Wed, 25 May 2022 17:38:24 GMT

Hi @Shakemustafa,

This seems like a issue on PAN OS side, I recommend you to open a support case so that the next available engineer can help you with this issue.

Krishna Kumar Yadav

Product specialist

Palo Alto Networks

https://live.paloaltonetworks.com/t5/aiops-for-ngfw/ct-p/AIOps_for_NGFW

*Don’t forget to accept the solution provided!*

Re: Unable to Upgrade PAN OS to 9.1.13-h3 from 9.1.11-h3- Error: findfs: unable to resolve 'LABEL=sysroot0'

jmatanane — Wed, 07 Feb 2024 22:29:49 GMT

I'm also getting a very similar response when trying to upgrade my PanOS. Says, "Failed to install Panorama_pc-10.2.4-h2 with the following errors. Label sysroot0 does not indicate a valid image."