Configuring PA-VM HA Failover Tests

Y.Choi — Mon, 29 Apr 2024 00:52:25 GMT

Hello.

I want to proceed with failover TEST with HA configuration using PA-VM for AWS.

The subnet is Public.Private.HA, and you have configured two PA-VMs in Public.

Persistent problems occur, Ethernet1/1 HA port Ethernet1/2 Untrust port in the PA-VM's NETWORK -> Interface -> Ethernet entry

If you reboot the equipment after setting the Ethernet1/3 Trust port like this, the port status continues to go down (see picture below)

1. PA-VM HA Statu

2. PA-VM (PA-Primary)

3. AWS ENI Status

When configured for the first time, the port is in a normal port up state, but when you restart the next day after stopping the instance, the port is in a down state.

PA-Secondary equipment sometimes seems to reboot automatically. And the user password I set doesn't work.

Port is down even after disconnecting ENI from AWS and trying to connect and rebooting PA-VM.

I don't know what the problem is.

What should I check?

topic Configuring PA-VM HA Failover Tests in VM-Series in the Public Cloud

Configuring PA-VM HA Failover Tests