error: azure marketplace vm-series do not bootstrap

Argiros — Thu, 07 Dec 2023 15:56:52 GMT

Template VM-Series Next-Generation Firewall from Palo Alto Networks (byol)

--------------------------------------------------------------------------------

bootstrap content

type=dhcp-client; hostname=eskfw81; vm-auth-key=xxxxxxx; panorama-server=xxxxxxx; tplname=xxxx-stack; dgname=xxx; dns-primary=8.8.8.8; dns-secondary=4.4.4.4; op-command-modes=jumbo-frame; vm-series-auto-registration-pin-id=xxxxxxx; vm-series-auto-registration-pin-value=xxxxxxxxxxxxxxxx

--------------------------------------------------------------------------------
show system bootstrap status

Bootstrap Phase Status Details
=============== ====== =======
Media Detection Success Media detected successfully
Media Sanity Check Success Media sanity check successful
Parsing of Initial Config Successful
Auto-commit Successful

--------------------------------------------------------------------------------

debug logview component bts_details

logs::

[ 0.000000] Command line: ro root=/dev/sda2 init=/sbin/init console=tty0 console=ttyS0,9600n8 alternate_root=/dev/vda2 alternate_root=/dev/xvda2 hugepages=0 alternate_root=/dev/nvme0n1p2

[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'

[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'

[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[ 0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'

[ 0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'

[ 0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'

[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256

[ 0.000000] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64

[ 0.000000] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512

[ 0.000000] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024

[ 0.000000] x86/fpu: Enabled xstate features 0xe7, context size is 2432 bytes, using 'compacted' format.

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable

[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable

[ 0.000000] BIOS-e820: [mem 0x000000003fff0000-0x000000003fffefff] ACPI data

[ 0.000000] BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] ACPI NVS

[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable

[ 0.000000] NX (Execute Disable) protection: active

[ 0.000000] SMBIOS 2.3 present.

[ 0.000000] DMI: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090008 12/07/2018

[ 0.000000] Hypervisor detected: Microsoft Hyper-V

[ 0.000000] Hyper-V: features 0x2e7f, hints 0x60c2c

[ 0.000000] Hyper-V Host Build:20348-10.0-1-0.1462

[ 0.000000] Hyper-V: LAPIC Timer Frequency: 0x30d40

[ 0.000000] tsc: Marking TSC unstable due to running on Hyper-V

[ 0.000000] Hyper-V: Using hypercall for remote TLB flush

[ 0.000000] clocksource: hyperv_clocksource_tsc_page: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns

[ 0.000000] tsc: Detected 2593.905 MHz processor

[ 0.000000] last_pfn = 0x440000 max_arch_pfn = 0x400000000

[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT

[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x400000000

[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f]

[ 0.000000] Using GB pages for direct mapping

[ 0.000000] ACPI: Early table checksum verification disabled

[ 0.000000] ACPI: RSDP 0x00000000000F5C00 000014 (v00 ACPIAM)

[ 0.000000] ACPI: RSDT 0x000000003FFF0000 000040 (v01 VRTUAL MICROSFT 12001807 MSFT 00000097)

[ 0.000000] ACPI: FACP 0x000000003FFF0200 000081 (v02 VRTUAL MICROSFT 12001807 MSFT 00000097)

[ 0.000000] ACPI: DSDT 0x000000003FFF1D24 003CD5 (v01 MSFTVM MSFTVM02 00000002 INTL 02002026)

[ 0.000000] ACPI: FACS 0x000000003FFFF000 000040

[ 0.000000] ACPI: WAET 0x000000003FFF1A80 000028 (v01 VRTUAL MICROSFT 12001807 MSFT 00000097)

[ 0.000000] ACPI: SLIC 0x000000003FFF1AC0 000176 (v01 VRTUAL MICROSFT 12001807 MSFT 00000097)

[ 0.000000] ACPI: OEM0 0x000000003FFF1CC0 000064 (v01 VRTUAL MICROSFT 12001807 MSFT 00000097)

[ 0.000000] ACPI: SRAT 0x000000003FFF0800 000160 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001)

[ 0.000000] ACPI: APIC 0x000000003FFF0300 000072 (v01 VRTUAL MICROSFT 12001807 MSFT 00000097)

[ 0.000000] ACPI: OEMB 0x000000003FFFF040 000064 (v01 VRTUAL MICROSFT 12001807 MSFT 00000097)

[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0

[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0

[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0

[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0

[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x3fffffff] hotplug

[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x43fffffff] hotplug

[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x440200000-0xfdfffffff] hotplug

[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x1000000000-0xffffffffff] hotplug

[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x10000200000-0x1ffffffffff] hotplug

[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x20000200000-0x3ffffffffff] hotplug

[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x3fffffff] + [mem 0x100000000-0x43fffffff] -> [mem 0x00000000-0x43fffffff]

[ 0.000000] NODE_DATA(0) allocated [mem 0x43ffd5000-0x43fffffff]

[ 0.000000] Zone ranges:

[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]

[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]

[ 0.000000] Normal [mem 0x0000000100000000-0x000000043fffffff]

[ 0.000000] Device empty

[ 0.000000] Movable zone start for each node

[ 0.000000] Early memory node ranges

[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]

[ 0.000000] node 0: [mem 0x0000000000100000-0x000000003ffeffff]

[ 0.000000] node 0: [mem 0x0000000100000000-0x000000043fffffff]

[ 0.000000] Zeroed struct page in unavailable ranges: 114 pages

[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fffffff]

[ 0.000000] ACPI: PM-Timer IO Port: 0x408

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])

[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs

[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]

[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]

[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]

[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]

[ 0.000000] PM: Registered nosave memory: [mem 0x3fff0000-0x3fffefff]

[ 0.000000] PM: Registered nosave memory: [mem 0x3ffff000-0x3fffffff]

[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0xffffffff]

[ 0.000000] [mem 0x40000000-0xffffffff] available for PCI devices

[ 0.000000] Booting paravirtualized kernel on Hyper-V

[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns

[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1

[ 0.000000] percpu: Embedded 52 pages/cpu s173208 r8192 d31592 u524288

[ 0.000000] Hyper-V: PV spinlocks enabled

[ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)

[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3612537

[ 0.000000] Policy zone: Normal

[ 0.000000] Kernel command line: ro root=/dev/sda2 init=/sbin/init console=tty0 console=ttyS0,9600n8 alternate_root=/dev/vda2 alternate_root=/dev/xvda2 hugepages=0 alternate_root=/dev/nvme0n1p2

[ 0.000000] Specific versions of hardware are certified with Red Hat Enterprise Linux 8. Please see the list of hardware certified with Red Hat Enterprise Linux 8 at https://catalog.redhat.com.

[ 0.000000] Memory: 1113572K/14679608K available (14341K kernel code, 2713K rwdata, 5808K rodata, 2732K init, 4232K bss, 333604K reserved, 0K cma-reserved)

[ 0.000000] Kernel/User page tables isolation: enabled

[ 0.000000] ftrace: allocating 46158 entries in 181 pages

[ 0.000000] ftrace: allocated 181 pages with 5 groups

[ 0.001000] rcu: Hierarchical RCU implementation.

[ 0.001000] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.

[ 0.001000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.

[ 0.001000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4

[ 0.001000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16

[ 0.001000] random: crng done (trusting CPU's manufacturer)

[ 0.001000] Console: colour VGA+ 80x25

[ 0.001000] printk: console [tty0] enabled

[ 0.001000] printk: console [ttyS0] enabled

[ 0.001000] ACPI: Core revision 20200110

[ 0.001000] APIC: Switch to symmetric I/O mode setup

[ 0.001000] Hyper-V: Using IPI hypercalls

[ 0.001005] Hyper-V: Using enlightened APIC (xapic mode)

[ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.81 BogoMIPS (lpj=2593905)

[ 0.009003] pid_max: default: 32768 minimum: 301

[ 0.010059] Security Framework initialized

[ 0.011003] Yama: becoming mindful.

[ 0.012029] AppArmor: AppArmor initialized

[ 0.015697] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)

[ 0.017338] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)

[ 0.018069] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)

[ 0.019044] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)

[ 0.020290] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8

[ 0.021004] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4

[ 0.022003] FEATURE SPEC_CTRL Not Present

[ 0.023002] FEATURE IBPB_SUPPORT Not Present

[ 0.024003] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization

[ 0.025003] Spectre V2 : Mitigation: Full generic retpoline

[ 0.026003] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch

[ 0.027002] Speculative Store Bypass: Vulnerable

[ 0.028006] TAA: Mitigation: Clear CPU buffers

[ 0.029002] MDS: Mitigation: Clear CPU buffers

[ 0.030322] Freeing SMP alternatives memory: 48K

[ 0.033247] smpboot: CPU0: Intel(R) Xeon(R) Platinum 8272CL CPU @ 2.60GHz (family: 0x6, model: 0x55, stepping: 0x7)

[ 0.034128] Performance Events: unsupported p6 CPU model 85 no PMU driver, software events only.

[ 0.035038] rcu: Hierarchical SRCU implementation.

[ 0.036885] NMI watchdog: Perf NMI watchdog permanently disabled

[ 0.037095] smp: Bringing up secondary CPUs ...

[ 0.038133] x86: Booting SMP configuration:

[ 0.039004] .... node #0, CPUs: #1 #2 #3

[ 0.040456] smp: Brought up 1 node, 4 CPUs

[ 0.042003] smpboot: Max logical packages: 1

[ 0.043009] smpboot: Total of 4 processors activated (20751.24 BogoMIPS)

[ 0.065735] node 0 deferred pages initialised in 21ms

[ 0.069513] devtmpfs: initialized

[ 0.071057] x86/mm: Memory block size: 128MB

[ 0.075125] PM: Registering ACPI NVS region [mem 0x3ffff000-0x3fffffff] (4096 bytes)

[ 0.079064] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns

[ 0.084018] futex hash table entries: 1024 (order: 4, 65536 bytes)

[ 0.088092] pinctrl core: initialized pinctrl subsystem

[ 0.091265] PM: RTC time: 15:23:24, date: 2023-12-07

[ 0.094173] NET: Registered protocol family 16

[ 0.097113] audit: initializing netlink subsys (disabled)

[ 0.100029] audit: type=2000 audit(1701962603.100:1): state=initialized audit_enabled=0 res=1

[ 0.101007] cpuidle: using governor menu

[ 0.103086] ACPI: bus type PCI registered

[ 0.105005] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[ 0.109065] dca service started, version 1.12.1

[ 0.112231] PCI: Using configuration type 1 for base access

[ 0.117026] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages

[ 0.121007] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages

[ 0.125090] ACPI: Added _OSI(Module Device)

[ 0.128005] ACPI: Added _OSI(Processor Device)

[ 0.130003] ACPI: Added _OSI(3.0 _SCP Extensions)

[ 0.133003] ACPI: Added _OSI(Processor Aggregator Device)

[ 0.136003] ACPI: Added _OSI(Linux-Dell-Video)

[ 0.139003] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)

[ 0.142003] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)

[ 0.147510] ACPI: 1 ACPI AML tables successfully acquired and loaded

[ 0.153913] ACPI: Interpreter enabled

[ 0.156013] ACPI: (supports S0 S5)

[ 0.158003] ACPI: Using IOAPIC for interrupt routing

[ 0.161029] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[ 0.166241] ACPI: Enabled 1 GPEs in block 00 to 0F

[ 0.182580] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[ 0.186007] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]

[ 0.190013] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.

[ 0.196124] PCI host bridge to bus 0000:00

[ 0.198005] pci_bus 0000:00: root bus resource [mem 0xfe0000000-0xfffffffff window]

[ 0.202003] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]

[ 0.206003] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]

[ 0.209003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

[ 0.213004] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfffbffff window]

[ 0.217005] pci_bus 0000:00: root bus resource [bus 00-ff]

[ 0.221123] pci 0000:00:00.0: [8086:7192] type 00 class 0x060000

[ 0.225531] pci 0000:00:07.0: [8086:7110] type 00 class 0x060100

[ 0.231099] pci 0000:00:07.1: [8086:7111] type 00 class 0x010180

[ 0.235665] pci 0000:00:07.1: reg 0x20: [io 0xffa0-0xffaf]

[ 0.239609] pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]

[ 0.244004] pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6]

[ 0.247003] pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]

[ 0.251003] pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376]

[ 0.254412] pci 0000:00:07.3: [8086:7113] type 00 class 0x068000

[ 0.258035] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,

[ 0.258035] * this clock source is slow. Consider trying other clock sources

[ 0.268825] pci 0000:00:07.3: quirk: [io 0x0400-0x043f] claimed by PIIX4 ACPI

[ 0.273729] pci 0000:00:08.0: [1414:5353] type 00 class 0x030000

[ 0.277406] pci 0000:00:08.0: reg 0x10: [mem 0xf8000000-0xfbffffff]

[ 0.291324] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)

[ 0.296169] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.

[ 0.300163] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.

[ 0.305166] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.

[ 0.309237] iommu: Default domain type: Passthrough

[ 0.312037] pci 0000:00:08.0: vgaarb: setting as boot VGA device

[ 0.313000] pci 0000:00:08.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none

[ 0.320004] pci 0000:00:08.0: vgaarb: bridge control possible

[ 0.323003] vgaarb: loaded

[ 0.325103] SCSI subsystem initialized

[ 0.328036] ACPI: bus type USB registered

[ 0.330027] usbcore: registered new interface driver usbfs

[ 0.333010] usbcore: registered new interface driver hub

[ 0.336023] usbcore: registered new device driver usb

[ 0.339017] pps_core: LinuxPPS API ver. 1 registered

[ 0.347005] PTP clock support registered

[ 0.349022] EDAC MC: Ver: 3.0.0

[ 0.352123] hv_vmbus: Vmbus version:4.0

[ 0.355047] PCI: Using ACPI for IRQ routing

[ 0.358023] NetLabel: Initializing

[ 0.361003] NetLabel: domain hash size = 128

[ 0.363002] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO

[ 0.366016] NetLabel: unlabeled traffic allowed by default

[ 0.370146] clocksource: Switched to clocksource hyperv_clocksource_tsc_page

[ 0.492475] AppArmor: AppArmor Filesystem Enabled

[ 0.496013] pnp: PnP ACPI init

[ 0.500013] system 00:06: [io 0x01e0-0x01ef] has been reserved

[ 0.503659] system 00:06: [io 0x0160-0x016f] has been reserved

[ 0.507367] system 00:06: [io 0x0278-0x027f] has been reserved

[ 0.510798] system 00:06: [io 0x0378-0x037f] has been reserved

[ 0.514115] system 00:06: [io 0x0678-0x067f] has been reserved

[ 0.519366] system 00:06: [io 0x0778-0x077f] has been reserved

[ 0.522888] system 00:06: [io 0x04d0-0x04d1] has been reserved

[ 0.526494] system 00:07: [io 0x0400-0x043f] has been reserved

[ 0.529983] system 00:07: [io 0x0370-0x0371] has been reserved

[ 0.533505] system 00:07: [io 0x0440-0x044f] has been reserved

[ 0.537347] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved

[ 0.541403] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved

[ 0.545176] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved

[ 0.549255] system 00:08: [mem 0x000c0000-0x000dffff] could not be reserved

[ 0.553234] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved

[ 0.557228] system 00:08: [mem 0x00100000-0x3fffffff] could not be reserved

[ 0.561066] system 00:08: [mem 0xfffc0000-0xffffffff] has been reserved

[ 0.565127] pnp: PnP ACPI: found 9 devices

[ 0.574561] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[ 0.579578] pci_bus 0000:00: resource 4 [mem 0xfe0000000-0xfffffffff window]

[ 0.583622] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7 window]

[ 0.587253] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff window]

[ 0.590898] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff window]

[ 0.594705] pci_bus 0000:00: resource 8 [mem 0x40000000-0xfffbffff window]

[ 0.598749] NET: Registered protocol family 2

[ 0.601522] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)

[ 0.606017] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[ 0.610422] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[ 0.614544] TCP: Hash tables configured (established 131072 bind 65536)

[ 0.618496] UDP hash table entries: 8192 (order: 6, 262144 bytes)

[ 0.621960] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)

[ 0.625550] NET: Registered protocol family 1

[ 0.628551] RPC: Registered named UNIX socket transport module.

[ 0.631848] RPC: Registered udp transport module.

[ 0.634648] RPC: Registered tcp transport module.

[ 0.639138] RPC: Registered tcp NFSv4.1 backchannel transport module.

[ 0.642847] pci 0000:00:00.0: Limiting direct PCI/PCI transfers

[ 0.646474] pci 0000:00:08.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[ 0.651307] PCI: CLS 0 bytes, default 64

[ 0.653967] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[ 0.657717] software IO TLB: mapped [mem 0x3bff0000-0x3fff0000] (64MB)

[ 0.661901] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer

[ 0.669437] Initialise system trusted keyrings

[ 0.672066] Key type blacklist registered

[ 0.674544] workingset: timestamp_bits=36 max_order=22 bucket_order=0

[ 0.678293] zbud: loaded

[ 0.680568] NFS: Registering the id_resolver key type

[ 0.683778] Key type id_resolver registered

[ 0.686322] Key type id_legacy registered

[ 0.688870] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

[ 0.693032] pstore: using deflate compression

[ 0.695684] Platform Keyring initialized

[ 0.730807] NET: Registered protocol family 38

[ 0.733936] Key type asymmetric registered

[ 0.736581] Asymmetric key parser 'x509' registered

[ 0.739734] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)

[ 0.743843] io scheduler mq-deadline registered

[ 0.746489] io scheduler kyber registered

[ 0.749027] io scheduler bfq registered

[ 0.751590] atomic64_test: passed for x86-64 platform with CX8 and with SSE

[ 0.758438] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0

[ 0.763031] ACPI: Power Button [PWRF]

[ 0.765745] ioatdma: Intel(R) QuickData Technology Driver 5.00

[ 0.769337] Serial: 8250/16550 driver, 20 ports, IRQ sharing enabled

[ 0.798873] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A

[ 0.828666] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A

[ 0.833690] Non-volatile memory driver v1.3

[ 0.836521] Linux agpgart interface v0.103

[ 0.839218] i2c /dev entries driver

[ 0.841469] pan_gpio_init: dev not found

[ 0.843922] pan_gpio_init: skipping gpio 181 - ret -517

[ 0.846898] pan_gpio_init: skipping gpio 182 - ret -517

[ 0.850106] Loading PAN platform type

[ 0.852471] cpld: cpld Test after platform_get_resource() res->start = 1536

[ 0.856329] cpld: cpld: Found cpld chip with rev ID=0xff

[ 0.859879] Guest personality initialized and is inactive

[ 0.863184] VMCI host device registered (name=vmci, major=10, minor=62)

[ 0.866886] Initialized host personality

[ 0.869413] rdac: device handler registered

[ 0.872047] hp_sw: device handler registered

[ 0.874507] emc: device handler registered

[ 0.877145] alua: device handler registered

[ 0.883917] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)

[ 0.887978] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)

[ 0.891639] megasas: 07.714.04.00-rh1

[ 0.893889] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.

[ 0.897928] VMware PVSCSI driver - version 1.0.7.0-k

[ 0.900912] hv_vmbus: registering driver hv_storvsc

[ 0.904476] scsi host0: storvsc_host_t

[ 0.907254] scsi 0:0:0:0: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 5

[ 0.913058] scsi host1: storvsc_host_t

[ 0.915882] scsi 1:0:1:0: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 5

[ 0.921608] scsi host2: storvsc_host_t

[ 0.928548] scsi host3: storvsc_host_t

[ 0.939007] sd 0:0:0:0: [sda] 125829120 512-byte logical blocks: (64.4 GB/60.0 GiB)

[ 0.939115] ata_piix 0000:00:07.1: Hyper-V Virtual Machine detected, ATA device ignore set

[ 0.939141] sd 1:0:1:0: [sdb] 419430400 512-byte logical blocks: (215 GB/200 GiB)

[ 0.939142] sd 1:0:1:0: [sdb] 4096-byte physical blocks

[ 0.939207] sd 1:0:1:0: [sdb] Write Protect is off

[ 0.939305] sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA

[ 0.944844] sd 0:0:0:0: [sda] 4096-byte physical blocks

[ 0.944918] sd 0:0:0:0: [sda] Write Protect is off

[ 0.952346] sdb: sdb1

[ 0.953306] scsi host4: ata_piix

[ 0.953430] scsi host5: ata_piix

[ 0.953480] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14

[ 0.953482] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15

[ 0.953611] libphy: Fixed MDIO Bus: probed

[ 0.953617] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k

[ 0.953628] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 2.14.13

[ 0.953690] ice_swx: Intel(R) Ethernet Connection E800 Series Linux Driver - version 1.6.0_rc18_pan_7

[ 0.953708] Intel(R) Ethernet Switch Linux Kernel Driver - version bmsm-5.1.0.11

[ 0.953731] usbcore: registered new interface driver asix

[ 0.953743] usbcore: registered new interface driver ax88179_178a

[ 0.953746] Fusion MPT base driver 3.04.20

[ 0.953752] Fusion MPT SPI Host driver 3.04.20

[ 0.953761] Fusion MPT SAS Host driver 3.04.20

[ 0.953770] Fusion MPT misc device (ioctl) driver 3.04.20

[ 0.953814] mptctl: Registered with Fusion MPT base driver

[ 0.953815] mptctl: /dev/mptctl @ (major,minor=10,220)

[ 0.953867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 0.953869] ehci-pci: EHCI PCI platform driver

[ 0.953876] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 0.953878] ohci-pci: OHCI PCI platform driver

[ 0.953885] uhci_hcd: USB Universal Host Controller Interface driver

[ 0.953915] usbcore: registered new interface driver uas

[ 0.953922] usbcore: registered new interface driver usb-storage

[ 0.953938] usbcore: registered new interface driver usbserial_generic

[ 0.953942] usbserial: USB Serial support registered for generic

[ 0.953980] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12

[ 0.956984] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 0.957034] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 0.957096] mousedev: PS/2 mouse device common for all mice

[ 0.957379] rtc_cmos 00:00: RTC can wake from S4

[ 0.959466] sd 1:0:1:0: [sdb] Attached SCSI disk

[ 0.962809] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA

[ 0.978779] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1

[ 0.986683] rtc_cmos 00:00: registered as rtc0

[ 1.110314] rtc_cmos 00:00: alarms up to one month, 114 bytes nvram

[ 1.116169] intel_pstate: CPU model not supported

[ 1.121731] sdhci: Secure Digital Host Controller Interface driver

[ 1.125398] sdhci: Copyright(c) Pierre Ossman

[ 1.128140] sdhci-pltfm: SDHCI platform and OF driver helper

[ 1.132380] hidraw: raw HID events driver (C) Jiri Kosina

[ 1.135980] usbcore: registered new interface driver usbhid

[ 1.139286] usbhid: USB HID core driver

[ 1.141897] drop_monitor: Initializing network drop monitor service

[ 1.145635] Initializing XFRM netlink socket

[ 1.148396] NET: Registered protocol family 10

[ 1.151446] Segment Routing with IPv6

[ 1.153989] NET: Registered protocol family 17

[ 1.156888] Key type dns_resolver registered

[ 1.227517] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >

[ 1.233352] sd 0:0:0:0: [sda] Attached SCSI disk

[ 1.268869] core: Using 1 MCE banks

[ 1.272404] RAS: Correctable Errors collector initialized.

[ 1.277130] registered taskstats version 1

[ 1.281070] Loading compiled-in X.509 certificates

[ 1.311773] Loaded X.509 cert 'PANOS Linux in-tree module signing key: 2051709d6c87832f95e5b9ef24563731b669b01f'

[ 1.317337] Loaded X.509 cert 'CentOS Linux Driver update signing key: 29bd4c0d06d2e9911044b5dc973309139b51d6d5'

[ 1.323124] Loaded X.509 cert 'CentOS Linux kpatch signing key: b49f086205909dc4da2cfa99376fb191d2f09e78'

[ 1.329011] zswap: loaded using pool lzo/zbud

[ 1.332414] ata2.00: ATAPI: Virtual CD, , max MWDMA2

[ 1.334115] Key type big_key registered

[ 1.338329] Key type encrypted registered

[ 1.340168] scsi 5:0:0:0: CD-ROM Msft Virtual CD/ROM 1.0 PQ: 0 ANSI: 5

[ 1.341050] AppArmor: AppArmor sha1 policy hashing enabled

[ 1.348504] sr 5:0:0:0: [sr0] scsi3-mmc drive: 0x/0x tray

[ 1.348936] ima: No TPM chip found, activating TPM-bypass!

[ 1.351888] cdrom: Uniform CD-ROM driver Revision: 3.20

[ 1.358442] ima: Allocated hash algorithm: sha1

[ 1.361129] ima: No architecture policies found

[ 1.363880] evm: Initialising EVM extended attributes:

[ 1.366904] evm: security.selinux

[ 1.371225] evm: security.apparmor

[ 1.373880] evm: security.ima

[ 1.376044] evm: security.capability

[ 1.378423] evm: HMAC attrs: 0x1

[ 1.381287] PM: Magic number: 3:975:385

[ 1.383856] thermal cooling_device0: hash matches

[ 1.387378] rtc_cmos 00:00: setting system clock to 2023-12-07 15:23:25 UTC (1701962605)

[ 1.391990] test 0 [ ok ]

[ 1.391994] test 1 [ ok ]

[ 1.393800] test 2 [ ok ]

[ 1.395691] Unstable clock detected, switching default tracing clock to "global"

[ 1.395691] If you want to keep using the local clock, then add:

[ 1.395691] "trace_clock=local"

[ 1.395691] on the kernel command line

[ 1.591115] psmouse serio1: trackpoint: failed to get extended button data, assuming 3 buttons

[ 5.335078] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x01, buttons: 3/3

[ 5.340490] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input3

[ 5.345085] md: Waiting for all devices to be available before autodetect

[ 5.350150] md: If you don't use raid, use raid=noautodetect

[ 5.355292] md: Autodetecting RAID arrays.

[ 5.358743] md: autorun ...

[ 5.361494] md: ... autorun DONE.

[ 5.384323] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)

[ 5.390173] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.

[ 5.394638] devtmpfs: mounted

[ 5.398148] Freeing unused kernel memory: 2732K

[ 5.403016] Write protecting the kernel read-only data: 22528k

[ 5.408543] Freeing unused kernel memory: 2008K

[ 5.411396] Freeing unused kernel memory: 336K

INIT: version 2.86 booting

mount: /proc/bus/usb: mount point does not exist.

Welcome to CentOS Linux

Starting udev: /sbin/start_udev: line 235: /proc/sys/kernel/hotplug: No such file or directory

[ OK ]

Setting clock (utc): Thu Dec 7 07:23:38 PST 2023 [ OK ]

Setting hostname vm: [ OK ]

Checking filesystems:

Running filesystem check on maint: [ OK ]

Running filesystem check on sysroot0: [ OK ]

Running filesystem check on panrepo: [ OK ]

Running filesystem check on pancfg: [ OK ]

[ OK ]

Remounting root filesystem in read-write mode: [ OK ]

Enabling local filesystem quotas: quotaon: Warning: No quota format detected in the kernel.

[ OK ]

rm: cannot remove '/var/run/httpd/htcacheclean': Is a directory

Enabling /etc/fstab swaps: [ OK ]

Calling system activity data collector (sadc) ...

INIT: Entering runlevel: 3

Entering non-interactive startup

Starting Networking: * * * * * FIPS-CC Self-Tests Stage-1 begins * * * * *

RPMS verify command[/usr/local/bin/swm verify "11.0.2"]

* * * * * FIPS-CC Plugin Self-Tests Stage-2 begins * * * * *

* * * * * FIPS-CC Plugin Self-Tests Stage-2 passed * * * * *

* * * * * FIPS-CC plugin firstboot rollover begins * * * * *

plugin rollover passed

* * * * * FIPS-CC plugin firstboot rollover ends * * * * *

* * * * * VERIFY File System Integrity Stage-1 begins * * * * *

Verifying PAN-OS integrity on Root File System (POST) ...

Verifying oss-integrity on Root File System (POST) ...

FIPS-CC Integrity processing files:fs-integrity-mp, sbin-panos-mp, mgmt-panos, apps-panos-mpfs, cli, swm, secure-cmn, ostra-all, oss-integrity-vmmp, cfg-panos-mp

FIPS-CC integrity tests - Management plane oss verification passed

Verifying OSS integrity on Dataplane File System (POST) ...

FIPS-CC integrity tests - Dataplane oss verification passed

Verifying PAN-OS integrity on Dataplane File System (POST) ...

FIPS-CC Integrity processing files:fs-integrity-dp, apps-panos-dpfs, sbin-panos-dp, oss-integrity-vmdp

FIPS-CC integrity tests - Dataplane file system verification passed

Skipping logplane integrity tests on product with no lp

Skipping dataplane integrity tests on product with no idp

* * * * * VERIFY File System Integrity Stage-1 passed * * * * *

* * * * * CRYPTO POST Stage-1 begins * * * * *

* * * * Update crypto policies succeeded * * * *

* * * * * CRYPTO POST Stage-1 passed * * * * *

* * * * * FIPS-CC Self-Tests Stage-1 passed * * * * *

FIPS-CC POST Stage-1 (sw-integrity and crypto tests) passed.

FIPS-CC integrity tests - Management plane file system verification passed

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500

inet 10.8.0.4 netmask 255.255.255.0 broadcast 10.8.0.255

inet6 fe80::6245:bdff:fee8:f2b5 prefixlen 64 scopeid 0x20<link>

ether 60:45:bd:e8:f2:b5 txqueuelen 1000 (Ethernet)

RX packets 34 bytes 2774 (2.7 KiB)

RX errors 0 dropped 0 overruns 0 frame 0

TX packets 9 bytes 1214 (1.1 KiB)

TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

[ OK ]

Starting syslog-ng-system:[2023-12-07T07:27:04.129654] WARNING: Configuration file format is too old, syslog-ng is running in compatibility mode. Please update it to use the syslog-ng 3.29 format at your time of convenience. To upgrade the configuration, please review the warnings about incompatible changes printed by syslog-ng, and once completed change the @version header at the top of the configuration file; config-version='3.9'

[2023-12-07T07:27:04.458560] Error reading serialized data; error='Error reading file (short read)'

[2023-12-07T07:27:04.458711] Persistent configuration file is in invalid format, ignoring;

[2023-12-07T07:27:04.469988] WARNING: log-fifo-size() works differently starting with syslog-ng 3.22 to avoid dropping flow-controlled messages when log-fifo-size() is misconfigured. From now on, log-fifo-size() only affects messages that are not flow-controlled. (Flow-controlled log paths have the flags(flow-control) option set.) To enable the new behaviour, update the @version string in your configuration and consider lowering the value of log-fifo-size().;

[ OK ]

Starting rpcbind: [ OK ]

Adding udev persistent rules[ OK ]

Starting pan_hardserver: [ OK ]

Skipping sshd: starting with PAN system processes

Starting xinetd: [ OK ]

Starting ntpd: [ OK ]

Starting NFS services: [ OK ]

Starting NFS mountd: [ OK ]

Starting NFS daemon: [ OK ]

Starting RPC idmapd: [ OK ]

Starting PAN Software: ksysd device creation with major 254 minor 0

Error: Failed to create openssl hash for /opt/paninstall/mgmt/factory/certs/0127_NetLock_Minositett_Kozjegyzoi_(Class_QA)_Tanusitvanykiado.cer due to ["/bin/sh: -c: line 0: syntax error near unexpected token `('", "/bin/sh: -c: line 0: `ln -s /opt/paninstall/mgmt/factory/certs/0127_NetLock_Minositett_Kozjegyzoi_(Class_QA)_Tanusitvanykiado.cer `/usr/bin/openssl x509 -hash -noout -in /opt/paninstall/mgmt/factory/certs/0127_NetLock_Minositett_Kozjegyzoi_(Class_QA)_Tanusitvanykiado.cer`.0'", '']

Error: Failed to create openssl hash for /opt/paninstall/mgmt/factory/certs/0041_Entrust.net_Certification_Authority_(2048).cer due to ["/bin/sh: -c: line 0: syntax error near unexpected token `('", "/bin/sh: -c: line 0: `ln -s /opt/paninstall/mgmt/factory/certs/0041_Entrust.net_Certification_Authority_(2048).cer `/usr/bin/openssl x509 -hash -noout -in /opt/paninstall/mgmt/factory/certs/0041_Entrust.net_Certification_Authority_(2048).cer`.0'", '']

Error: Failed to create openssl hash for /opt/paninstall/mgmt/factory/certs/0235_Government_Root_Certification_Authority.cer due to ["ln: failed to create symbolic link '6410666e.0': File exists", '']

Error: Failed to create openssl hash for /opt/paninstall/mgmt/factory/certs/0045_NetLock_Platina_(Class_Platinum)_Ftanstvny.cer due to ["/bin/sh: -c: line 0: syntax error near unexpected token `('", "/bin/sh: -c: line 0: `ln -s /opt/paninstall/mgmt/factory/certs/0045_NetLock_Platina_(Class_Platinum)_Ftanstvny.cer `/usr/bin/openssl x509 -hash -noout -in /opt/paninstall/mgmt/factory/certs/0045_NetLock_Platina_(Class_Platinum)_Ftanstvny.cer`.0'", '']

Error: Failed to create openssl hash for /opt/paninstall/mgmt/factory/certs/0365_VI_Registru_Centras_RCSC_(RootCA).cer due to ["/bin/sh: -c: line 0: syntax error near unexpected token `('", "/bin/sh: -c: line 0: `ln -s /opt/paninstall/mgmt/factory/certs/0365_VI_Registru_Centras_RCSC_(RootCA).cer `/usr/bin/openssl x509 -hash -noout -in /opt/paninstall/mgmt/factory/certs/0365_VI_Registru_Centras_RCSC_(RootCA).cer`.0'", '']

Error: Failed to create openssl hash for /opt/paninstall/mgmt/factory/certs/0079_NetLock_Arany_(Class_Gold)_Ftanstvny.cer due to ["/bin/sh: -c: line 0: syntax error near unexpected token `('", "/bin/sh: -c: line 0: `ln -s /opt/paninstall/mgmt/factory/certs/0079_NetLock_Arany_(Class_Gold)_Ftanstvny.cer `/usr/bin/openssl x509 -hash -noout -in /opt/paninstall/mgmt/factory/certs/0079_NetLock_Arany_(Class_Gold)_Ftanstvny.cer`.0'", '']

2023-12-07T15:27:51.845235Z INFO MainThread Unable to get cloud-init enabled status from service: Command '['service', 'cloud-init', 'status']' returned non-zero exit status 1.

2023-12-07T15:27:51.846870Z INFO MainThread cloud-init is enabled: False

2023-12-07T15:27:51.848323Z INFO MainThread Using waagent for provisioning

2023-12-07T15:27:51.850066Z INFO MainThread Examine /proc/net/route for primary interface

2023-12-07T15:27:51.851458Z INFO MainThread Primary interface is [eth0]

2023-12-07T15:27:52.002078Z INFO MainThread IPv4 address: 10.8.0.4

2023-12-07T15:27:52.003414Z INFO MainThread Running default provisioning handler

2023-12-07T15:27:52.018324Z INFO MainThread Unable to get cloud-init enabled status from service: Command '['service', 'cloud-init', 'status']' returned non-zero exit status 1.

2023-12-07T15:27:52.019761Z INFO MainThread cloud-init is enabled: False

2023-12-07T15:27:52.022213Z INFO MainThread Copying ovf-env.xml

2023-12-07T15:27:52.132263Z INFO MainThread Successfully mounted dvd

2023-12-07T15:27:52.151401Z INFO MainThread Detect protocol endpoint

2023-12-07T15:27:52.152471Z INFO MainThread Clean protocol and wireserver endpoint

2023-12-07T15:27:52.153913Z INFO MainThread WireServer endpoint is not found. Rerun dhcp handler

2023-12-07T15:27:52.155173Z INFO MainThread Test for route to 168.63.129.16

2023-12-07T15:27:52.156605Z INFO MainThread Route to 168.63.129.16 exists

2023-12-07T15:27:52.157841Z INFO MainThread Wire server endpoint:168.63.129.16

2023-12-07T15:27:52.163003Z INFO MainThread Fabric preferred wire protocol version:2015-04-05

2023-12-07T15:27:52.163276Z INFO MainThread Wire protocol version:2012-11-30

2023-12-07T15:27:52.163355Z INFO MainThread Server preferred version:2015-04-05

2023-12-07T15:27:52.223968Z INFO MainThread Initializing goal state during protocol detection

2023-12-07T15:27:52.232145Z INFO MainThread Fetching new goal state [incarnation 2 (force update)]

2023-12-07T15:27:52.297636Z INFO MainThread Found private key matching thumbprint 7A6ADAC6FAFD9EF6FD5CD52289F04E6B1D61F708

2023-12-07T15:27:52.308557Z INFO MainThread Fetch goal state completed

2023-12-07T15:27:52.316168Z INFO MainThread Starting provisioning

2023-12-07T15:27:52.317390Z INFO MainThread Handle ovf-env.xml.

2023-12-07T15:27:52.411580Z INFO MainThread Save custom data

2023-12-07T15:27:53.690586Z INFO MainThread Provisioning complete

2023-12-07 07:27:59.643 -0800 Error: sysd_construct_sync_importer(sysd_sync.c:360): sysd_sync_register() failed: (111) Unknown error code

2023-12-07 07:28:01.379 -0800 Error: sysd_construct_sync_importer(sysd_sync.c:360): sysd_sync_register() failed: (111) Unknown error code

tune2fs -l /dev/sda6

9751756K

[ OK ]

Masterd started successfully

vm login: 2023-12-07 07:28:15.546 -0800 INFO: Media detected, Starting media sanity check

2023-12-07 07:28:15.755 -0800 INFO: No valid software image is found on media.

2023-12-07 07:28:15.859 -0800 INFO: Bootstrap media sanity check passed

2023-12-07 07:28:15.859 -0800 INFO: System upgrade state: firstboot, starting upgrade mode

2023-12-07 07:28:15.860 -0800 INFO: Bootstrap media detection completed.

DHCP: new ip 10.8.0.4 : mask 255.255.255.0

2023-12-07 07:28:27.211 -0800 INFO: Starting bootstrap...

2023-12-07 07:28:27.214 -0800 INFO: No valid software image is found on media.

2023-12-07 07:28:27.217 -0800 INFO: Starting device bootstrapping

2023-12-07 07:28:27.220 -0800 INFO: Preparing system of management ready state

2023-12-07 07:28:27.224 -0800 INFO: Copying over configuration files

2023-12-07 07:28:27.229 -0800 INFO: Marking box configuration ready

2023-12-07 07:28:33.860 -0800 INFO: Device upgrade completed, performing software restart

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500

inet 10.8.0.4 netmask 255.255.255.0 broadcast 10.8.0.255

inet6 fe80::6245:bdff:fee8:f2b5 prefixlen 64 scopeid 0x20<link>

ether 60:45:bd:e8:f2:b5 txqueuelen 1000 (Ethernet)

RX packets 216 bytes 111220 (108.6 KiB)

RX errors 0 dropped 0 overruns 0 frame 0

TX packets 226 bytes 34124 (33.3 KiB)

TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

Masterd started successfully

2023-12-07 07:29:36.741 -0800 INFO: Media detected, Starting media sanity check

2023-12-07 07:29:37.057 -0800 INFO: Bootstrap media sanity check passed

2023-12-07 07:29:37.059 -0800 INFO: btsErrorMgmtReady: System upgrade state: management_ready, skip upgrade mode(9)

DHCP: new ip 10.8.0.4 : mask 255.255.255.0

2023-12-07 07:31:40.020 -0800 INFO: Initial configuration processed from init cfg file.

DHCP: new ip 10.8.0.4 : mask 255.255.255.0

2023-12-07 07:33:14.451 -0800 INFO: Bootstrap successfully completed

2023-12-07 07:33:16.875 -0800 INFO: Performing bootstrap cleanup, state: successful

2023-12-07 07:33:16.876 -0800 INFO: Bootstrap process completed successfully, collected logs, marked box stale

2023-12-07 07:33:16.876 -0800 INFO: Media logger exiting.

eskazfw1 login:

eskazfw1 login: suporte

Password:

Number of failed attempts since last successful login: 0

???suporte@eskazfw1> show sys

> syslogng-ssl-conn-validation Show syslog-ng ssl connection validation settings

> system Show system state and information

???suporte@eskazfw1> show system bootstrap status

| Pipe through a command

<Enter> Finish input

???suporte@eskazfw1> show system bootstrap status

| Pipe through a command

<Enter> Finish input

???suporte@eskazfw1> show system bootstrap status

Bootstrap Phase Status Details

=============== ====== =======

Media Detection Success Media detected successfully

Media Sanity Check Success Media sanity check successful

Parsing of Initial Config Successful

Auto-commit Successful

???suporte@eskazfw1> debug log

> log-output-need-utf8 system option to support utf8 for log output

> log-receiver debug option for logrcvr daemon

> logdb-usage Report logdb usage

> logview debug logview

???suporte@eskazfw1> debug logview component bts

bts bts

bts_details bts_details

<value> For multiple components specify with comma separated. ex: dagger,sysd

<Enter> Finish input

???suporte@eskazfw1> debug logview component bts

Got 30 logs.

s1mp bts 2023-12-07 07:34:22: INFO: Running command: status []

s1mp bts 2023-12-07 07:33:16: INFO: Bootstrap process completed successfully, collected logs, marked box stale

s1mp bts 2023-12-07 07:33:16: INFO: Performing bootstrap cleanup, state: successful

s1mp bts 2023-12-07 07:33:14: INFO: Running command: log ['2', 'Bootstrap successfully completed']

s1mp bts 2023-12-07 07:33:14: INFO: Running command: cleanup []

s1mp bts 2023-12-07 07:31:40: INFO: Running command: log ['2', 'Initial configuration processed from init cfg file.']

s1mp bts 2023-12-07 07:29:37: ERROR: btsErrorMgmtReady: System upgrade state: management_ready, skip upgrade mode(9)

s1mp bts 2023-12-07 07:29:37: INFO: Copying over latest init-cfg.txt for cloud

s1mp bts 2023-12-07 07:29:37: INFO: Bootstrap media sanity check passed

s1mp bts 2023-12-07 07:29:36: INFO: Media detected, Starting media sanity check

s1mp bts 2023-12-07 07:29:34: INFO: Running command: detect []

s1mp bts 2023-12-07 07:28:33: INFO: Device upgrade completed, performing software restart

s1mp bts 2023-12-07 07:28:27: INFO: Infra bootstrapping completed successfully

??? s1mp bts 2023-12-07 07:28:27: INFO: Marking box configuration ready

s1mp bts 2023-12-07 07:28:27: INFO: bootstrap file missing: /mnt/install_media/config/bootstrap.xml

s1mp bts 2023-12-07 07:28:27: INFO: Copying over configuration files

s1mp bts 2023-12-07 07:28:27: INFO: Preparing system of management ready state

s1mp bts 2023-12-07 07:28:27: INFO: Starting device bootstrapping

s1mp bts 2023-12-07 07:28:27: INFO: No valid software image is found on media.

s1mp bts 2023-12-07 07:28:27: INFO: Starting bootstrap...

s1mp bts 2023-12-07 07:28:27: INFO: Running command: upgrade []

s1mp bts 2023-12-07 07:28:27: INFO: Bootstrap log initialized

--------------------------------------------------------------------------------

s1mp bts 2023-12-07 07:28:15: INFO: Bootstrap media detection completed.

--------------------------------------------------------------------------------

s1mp bts 2023-12-07 07:28:15: INFO: System upgrade state: firstboot, starting upgrade mode

s1mp bts 2023-12-07 07:28:15: INFO: Bootstrap media sanity check passed

s1mp bts 2023-12-07 07:28:15: INFO: No valid software image is found on media.

s1mp bts 2023-12-07 07:28:15: INFO: Media detected, Starting media sanity check

s1mp bts 2023-12-07 07:28:12: INFO: Running command: detect []

s1mp bts 2023-12-07 07:28:12: INFO: Bootstrap log initialized

--------------------------------------------------------------------------------

???suporte@eskazfw1> debug logview component bts

bts bts

bts_details bts_details

<value> For multiple components specify with comma separated. ex: dagger,sysd

<Enter> Finish input

???suporte@eskazfw1> debug logview component bts

bts bts

bts_details bts_details

<value> For multiple components specify with comma separated. ex: dagger,sysd

<Enter> Finish input

???suporte@eskazfw1> debug logview component bts_details

+ display-forward default display is reverse

+ end-time Datetime YYYY/MM/DD@hh:mm:ss (e.g. 2013/03/02@10:00:00)

+ max-logs Number of logs to display min 100 and max 20000. Default 2000

+ quiet Quiet mode: Just print log count default is false

+ role For multiple roles specify with comma separated. ex: mp,cp,dp

+ severity For multiple severities specify with comma separated. ex: error,info

+ slot For multiple slots specify with comma separated. ex: 1,2

+ start-time Datetime YYYY/MM/DD@hh:mm:ss (e.g. 2013/03/01@10:00:00)

+ thorough Perform thorough search default is quick mode

| Pipe through a command

<Enter> Finish input

???suporte@eskazfw1> debug logview component bts_details

Got 93 logs.

s1mp bts_details 2023-12-07 07:34:22: INFO: Running command: status []

s1mp bts_details 2023-12-07 07:33:16: INFO: Bootstrap process completed successfully, collected logs, marked box stale

s1mp bts_details 2023-12-07 07:33:16: INFO: Performing bootstrap cleanup, state: successful

s1mp bts_details 2023-12-07 07:33:14: DEBUG: Performing system sync for 2 seconds.

s1mp bts_details 2023-12-07 07:33:14: DEBUG: Valid mounted media found.

s1mp bts_details 2023-12-07 07:33:14: INFO: Running command: log ['2', 'Bootstrap successfully completed']

s1mp bts_details 2023-12-07 07:33:14: DEBUG: Valid mounted media found.

s1mp bts_details 2023-12-07 07:33:14: DEBUG: Setup media logging

s1mp bts_details 2023-12-07 07:33:14: INFO: Running command: cleanup []

s1mp bts_details 2023-12-07 07:31:40: DEBUG: Valid mounted media found.

s1mp bts_details 2023-12-07 07:31:40: INFO: Running command: log ['2', 'Initial configuration processed from init cfg file.']

s1mp bts_details 2023-12-07 07:29:37: ERROR: btsErrorMgmtReady: System upgrade state: management_ready, skip upgrade mode(9)

s1mp bts_details 2023-12-07 07:29:37: DEBUG: Merging the init-cfg.txt for VM

??? s1mp bts_details 2023-12-07 07:29:37: DEBUG: Found generic meta file: /mnt/install_media/config/init-cfg.txt

s1mp bts_details 2023-12-07 07:29:37: INFO: Copying over latest init-cfg.txt for cloud

s1mp bts_details 2023-12-07 07:29:37: DEBUG: VM in cloud mode, skipping config

s1mp bts_details 2023-12-07 07:29:37: INFO: Bootstrap media sanity check passed

s1mp bts_details 2023-12-07 07:29:37: DEBUG: Adding status: Media Sanity Check Success Media sanity check successful

s1mp bts_details 2023-12-07 07:29:36: DEBUG: Syslogging: /usr/local/bin/pan_elog -u 12 -e 201326628 -s informational -m "Media sanity check successful" -x

s1mp bts_details 2023-12-07 07:29:36: DEBUG: VM in cloud mode, skipping config

s1mp bts_details 2023-12-07 07:29:36: DEBUG: Found generic meta file: /mnt/install_media/config/init-cfg.txt

s1mp bts_details 2023-12-07 07:29:36: DEBUG: (/bin/mount | /bin/grep /mnt/install_media): Install media detected: (['/dev/sda5 on /mnt/install_media type ext3 (rw,relatime)\n'] [])

s1mp bts_details 2023-12-07 07:29:36: DEBUG: Adding status: Media Detection Success Media detected successfully

s1mp bts_details 2023-12-07 07:29:36: DEBUG: Syslogging: /usr/local/bin/pan_elog -u 12 -e 201326627 -s informational -m "Media detected successfully" -x

s1mp bts_details 2023-12-07 07:29:36: INFO: Media detected, Starting media sanity check

s1mp bts_details 2023-12-07 07:29:36: DEBUG: Valid mounted media found.

??? s1mp bts_details 2023-12-07 07:29:36: DEBUG: Setup media logging

???l media

???(rw,relatime)\n'] [])

???suporte@eskazfw1>

suporte@eskazfw1>

suporte@eskazfw1> debug logview component bts_details