topic Re: Firewalls not attaching to panorama in VM-Series in the Public Cloud

Firewalls not attaching to panorama

VenkatSira — Wed, 25 Mar 2020 16:00:01 GMT

Hello,

After bootstrapping VM series firewall, instance is not available in panorama, bootstrap seems successful, how to troubleshoot more

Is there a particular log i can check where its failing

Version is 9.0.5xfr

Thanks

Venkat

Re: Firewalls not attaching to panorama

jperry1 — Wed, 25 Mar 2020 17:26:32 GMT

on the firewall from the CLI run

show bootstrap status

make sure your Panorama mgmt interface is accessible from the IP's the firewalls are attempting to connect from

make sure you have a valid VM-auth key as well.

Re: Firewalls not attaching to panorama

VenkatSira — Wed, 25 Mar 2020 17:45:36 GMT

Ping works for panorama server

It ahs right auth code

Bootstrap command shows all success.

Bootstrap Phase Status Details

=============== ====== =======

Media Detection Success Media detected successfully

Media Sanity Check Success Media sanity check successful

Parsing of Initial Config Successful

License Install Successful Successfully installed license key using authcode xxx

Content Install Successful Successfully installed Content

Auto-commit Failed Bootstrap failed.

Parsing of Initial Config Successful

License Install Successful Successfully installed license key using authcode xxx

Content Install Successful Successfully installed Content

Auto-commit Successful

Thanks

Re: Firewalls not attaching to panorama

jperry1 — Wed, 25 Mar 2020 17:59:24 GMT

Not auth code. you have a to generate an auth-key on the Panorama and add it to your init-cfg.txt file when you bootstrap. If you don't have a vm-auth-key then you will not be able to bootstrap to Panorama. So not the auth-code but auth-key