topic Re: Use CPU% = 50 in XSOAR DEV in Cortex XSOAR Discussions

Use CPU% = 50 in XSOAR DEV

S.Fernandez413037 — Mon, 26 Aug 2024 19:38:06 GMT

hi! i expermiented a rare problem in my xsoar dev, in there i have 0 jobs, 0 integration active, 0 incidents creation, 0 everything. But every 15 minutes, the cpu% increases to 50 for about 5 minutes, then to 0. The last change i've made is to configure the syslog to a host, but for this task, i followed step by step the official XSOAR documentation (https://docs-cortex.paloaltonetworks.com/r/Cortex-XSOAR/6.5/Cortex-XSOAR-Administrator-Guide/Send-the-Audit-Trail-to-an-External-Log-Service).

Re: Use CPU% = 50 in XSOAR DEV

R.Morena — Mon, 26 Aug 2024 22:15:02 GMT

Had you made any update lately?

Re: Use CPU% = 50 in XSOAR DEV

S.Fernandez413037 — Tue, 27 Aug 2024 18:29:34 GMT

two months ago i pass from 6.10 to 6.12

Re: Use CPU% = 50 in XSOAR DEV

kkrumenacker — Tue, 03 Sep 2024 12:26:33 GMT

Hello! Are you running RHEL version 8 or higher? If RHEL, I have seen cases where Podman containers can get stuck and a "podman system reset" can help. I would recommend backing up and custom podman container images prior to this, though, as it will remove them.