topic Re: Odd issue just starting Expedition in new setup in Expedition Discussions

Odd issue just starting Expedition in new setup

Tony_Kiser — Fri, 15 Feb 2019 15:54:01 GMT

I'm coming back around to doing some serious testing so we can start really using Expedition. Now, I downloaded the latest version, opened it in VMWare Fusion 8.5 and when I launch it, i get to this and can't even log into the CLI....

The cursor is actually blinking over the 'E'. Thought's on why I can't even log into the CLI right away?

Re: Odd issue just starting Expedition in new setup

bagherib — Fri, 15 Feb 2019 16:12:29 GMT

First you must upgrade to the latest version before using it.

Second, try the cli credentials of un:expedtion pw:paloalto. For the GUI, it is admin/paloalto.

Hope that helps,

Bob

Re: Odd issue just starting Expedition in new setup

Tony_Kiser — Fri, 15 Feb 2019 16:22:07 GMT

Ya, that's the problem. I can't even log into the CLI to get it upgraded. I key the credentials, but nothing happens. it's odd.

Re: Odd issue just starting Expedition in new setup

Tony_Kiser — Fri, 15 Feb 2019 16:43:53 GMT

OK, actually figured that part out (just upgraded OS X and Fusion 8.5 too old . 🙂

now, do you have, off the top of your head, the CLI syntax to upgrade the image from the CLI?

Re: Odd issue just starting Expedition in new setup

bagherib — Fri, 15 Feb 2019 17:25:30 GMT

Here you go:

How to update:

sudo apt-get update

sudo apt-get install expedition-beta

Re: Odd issue just starting Expedition in new setup

Tony_Kiser — Fri, 15 Feb 2019 17:46:41 GMT

feeling a little stupid... but maybe just cause it's Friday... 🙂

isn't the expedition tool supposed to pop up a box when I log in telling me what IP address to use to access it via a browser? I'm not seeing that.

Re: Odd issue just starting Expedition in new setup

bagherib — Fri, 15 Feb 2019 18:52:52 GMT

I use VMWare Workstation and I have DHCP setup on the subnet. The command for Linux is "ip address show". If you don't have an address via DHCP, you need to add a static to your interface config file in Linux.

I recommend you go to this URL and download the installation doc "Get the Guides" section.

https://live.paloaltonetworks.com/t5/Expedition-Migration-Tool/ct-p/migration_tool

Re,
Bob