topic Re: Expedition - No supported files to process in Expedition Discussions

Expedition - No supported files to process

tisc — Fri, 01 Mar 2019 10:44:38 GMT

Hi all,

I have the issue that imported logs from firewall on 8.1.X release can't be processed in Expedition.

I already changed the permissions of PALogs to anything possible. Also chmod 777 PALogs/.

Files are imported correctly but can't be processed at this point.

Any ideas what to try next?

tisc

Re: Expedition - No supported files to process

kiwi — Fri, 01 Mar 2019 12:52:24 GMT

@tisc ,

Moving this to the Expedition discussions.

Cheers,

-Kiwi.

Re: Expedition - No supported files to process

sjanita — Sun, 03 Mar 2019 09:57:50 GMT

you'll need to set the below permissions and ownership

$sudo chown www-data /home/expedition/PALogs

$sudo chmod +x /home/expedition/PALogs

Re: Expedition - No supported files to process

tisc — Mon, 04 Mar 2019 06:47:48 GMT

Hi all,

I found the issue. It's no permission issue. I imported logs from a specific firewall into expedition. Below connected devices I had my Panorama and all other firewalls. I made the mistake to select the Panorama while trying to parse these specific firewall logs.

So basically I just needed to select the correct firewall and click on process again. After that you can create a project and jump into panorama config to use the machinelearning to improve the panorama rulebase from this specific firewall.

thnks all

Re: Expedition - No supported files to process

simontaylor — Mon, 09 Sep 2019 05:37:39 GMT

same issue and resolution. If you add panorama as a device under 'improted devices' you will need to remove it and add any firewalls individually (says serial number taken otherwise).