Bug with virtual-wire

rhap4boy — Fri, 22 Mar 2019 22:08:16 GMT

There seems to a bug with Expedition.

In Project\Network\Zones, both trust and untrusted has been deleted.

In Project\Network\Virtual Wires, existing wires deleted and is empty.

Yet, I am still getting this error message when doing API Output Manager to the device

{"3":{"device":"PA-850VideoPro","status":"fail","text":"<msg><line><![CDATA[ vsys1 -> zone -> trust -> network -> virtual-wire \\'ethernet1\/2\\' is not a valid reference]]><\/line><line><![CDATA[ vsys1 -> zone -> trust -> network -> virtual-wire is invalid]]><\/line><\/msg>","date":"2019-03-22 16:59:36"}}

This seems to happen when my base image has virtual wires and trust and untrust zone. Even though I deleted them in Expedition, it still say virtual wire invalid.

Re: Bug with virtual-wire

sjanita — Sat, 23 Mar 2019 11:04:02 GMT

you need to manually remove the default virtual wire config on the target device for your command to complete.

This is a required step (and not a bug) for an initial device turn up if you intend to not use the default virtual wire config (which used eth1/1 and eth1/2 on the firewalls).

topic Bug with virtual-wire in Expedition Discussions

Bug with virtual-wire

Re: Bug with virtual-wire