topic Re: Import Interface Issue in Expedition Discussions

Import Interface Issue

aporue — Mon, 06 May 2019 14:38:14 GMT

I have a weird issue when I import the XLM into the firewalls and wanted to see if anyone has any thoughts on it. I am importing the interface configurations from Cisco ASA's into templates in Panorama that were migration in Expedition. The import into the template and the commit to Panorama works just fine but when I push to the firewall I keep running into the same issue. For some reason, I get the error listed below in the screen capture. Through trial and error, I was able to determine the fix is to simply open each interface/sub-interface and save (without making any changes) and the issue goes away and I am able to push to the firewalls. On the firewalls, I am deleting the default rulebase, zones, and interfaces before pushing from Panorama.

Re: Import Interface Issue

sjanita — Mon, 06 May 2019 14:45:54 GMT

thanks for reporting, the issue you described has been identified and will be fixed in an upcoming Expedition release.

Re: Import Interface Issue

aporue — Mon, 13 May 2019 13:01:30 GMT

Do you know when/what release this will be fixed in?

Thanks.

Re: Import Interface Issue

sjanita — Mon, 13 May 2019 22:59:14 GMT

can you test with ver 1.1.17 and update if fixed in this release.

Re: Import Interface Issue

aporue — Fri, 24 May 2019 03:08:20 GMT

Sorry for the late response but the issue is still present for me. I just tried again this evening and for every interface, I had to edit the config and simply click ok to make Panorama commit.