topic Re: Missing filter attribute 'Interface' for NAT Policies in Expedition Discussions

Missing filter attribute 'Interface' for NAT Policies

Per_Westerlund — Mon, 15 Jul 2019 09:09:56 GMT

Hi!

I'm running Expedition 1.1.28 and working with at large (200+) set of NAT policies imported via CSV. In my case, I would have liked the possibility to apply filters based on the value of the Interface attribute. However, that attribute is missing in the list.

Is it possible to have that attribute added?

/Per

Re: Missing filter attribute 'Interface' for NAT Policies

sjanita — Tue, 16 Jul 2019 07:28:52 GMT

To clarify are you looking for a filter to isolate NAT policies that are configured to NAT using an address-type of 'Interface'

Or are you looking for a filter for a source interface if configured?

Re: Missing filter attribute 'Interface' for NAT Policies

Per_Westerlund — Tue, 16 Jul 2019 07:43:30 GMT

I an looking for a filter for the (normally hidden) column 'Interface' in the NAT Policy tab. It belongs to the section where you describe the original packet to be handled. The optional field to describe which interface you are interested among possibly several egress interfaces belonging to a destination zone.

Ta answer your question directly, not source NAT of interface type, the other kind.

/Per

Re: Missing filter attribute 'Interface' for NAT Policies

sjanita — Tue, 16 Jul 2019 08:07:49 GMT

ok I know the field you are looking to filter on. I will submit a FR.

Re: Missing filter attribute 'Interface' for NAT Policies

Per_Westerlund — Tue, 16 Jul 2019 08:27:26 GMT

OK, thanks!

/Per