topic Re: extra firewall bug and expedition bug in Expedition Discussions

extra firewall bug and expedition bug

ZHOUJO5 — Tue, 09 Jun 2020 18:01:49 GMT

Re: extra firewall bug and expedition bug

lychiang — Tue, 09 Jun 2020 21:50:27 GMT

Hi @ZHOUJO5 , For migration from M500 to M600, you should be able to export the config from M500 and Load it back to M600. To further validate Expedition issue, do you mind email your M500 running config to fwmigrate@paloaltonetworks.com

Thank you!

Re: extra firewall bug and expedition bug

ZHOUJO5 — Wed, 10 Jun 2020 18:13:46 GMT

The reason we need to use expedition, as M500 over configuration size, (80M system offered), we have 53M blank space that palo alto confirmed we cannot reuse, that's the reason we use expedition to clean up and consolidate the fw configurations.

You may reference palo alto case 01373635, we have configuration file in it.

The issue I reported already showed in the capture screen that clarified the issue.

Re: extra firewall bug and expedition bug

lychiang — Wed, 10 Jun 2020 20:24:08 GMT

@ZHOUJO5 Expedition team does not have access to the TAC case , so please send your config to fwmigrate@paloaltonetworks.com if you think this is Expedition issue.

Thank!

Re: extra firewall bug and expedition bug

dgildelaig — Thu, 18 Jun 2020 10:18:50 GMT

The output you have in the CLI does not seem to be consistent with what you have shown in the GUI.

The CLI only shows the "any".

Additionally, does it make sense to have an "any" zone as well as a specific zone?