topic Re: IPv6 not show in interface and Virtual-Route on Expedition in Expedition Discussions

IPv6 not show in interface and Virtual-Route on Expedition

jirasith — Tue, 31 Aug 2021 04:43:43 GMT

Hello,

I tried to import Palo Alto Firewall Config to Expedition. But I didn't see ipv6 in the interface and Virtual-Route. It just shows only ipv4. and in the Security Policy and Object Address can show IPv6 normally. Do I have to Enable any Feature or It doesn't support IPv6 in the interface and Virtual-Route?

Details

Expedition Version: 1.1.106

Re: IPv6 not show in interface and Virtual-Route on Expedition

azuniga — Tue, 31 Aug 2021 14:52:31 GMT

Hello @jirasith

Yes, IPv6 is supported with expedition for both the interface and route. So the IPv6 exists on the Palo Alto firewall prior to import and it is not importing it properly? That would mean yes IPv6 was enabled on the firewall prior to an import and expedition will show the IPv6 address on both the interface and associated static route.

Re: IPv6 not show in interface and Virtual-Route on Expedition

jirasith — Sun, 05 Sep 2021 06:16:48 GMT

Hello Azuniga,

I checked in the running-config before imported to the expedition. I confirmed the running-config include ipv6 and the Palo Alto firewall already enabled IPv6. but when I imported running-config to the expedition. It did not show ipv6 on interface and Virtual-Route.

Re: IPv6 not show in interface and Virtual-Route on Expedition

azuniga — Tue, 07 Sep 2021 15:13:23 GMT

Hello @jirasith

Can you please take a look at the XML output and see if the IPV6 route is identified within that file? If it is indeed there then the XML should also reflect that.