topic Re: creating aggregate interface with expedition in Expedition Discussions

creating aggregate interface with expedition

KartikaUtami123 — Wed, 30 Mar 2022 22:47:35 GMT

Hi,

I am trying to migrate ASA configuration to PA with expedition.

The ASA has its physical interface and not as aggregate interface, and I want to convert these physical interfaces into aggregate interface with sub-interfaces. Is there a way to do this in expedition?

Re: creating aggregate interface with expedition

lychiang — Wed, 30 Mar 2022 23:09:32 GMT

Hi @KartikaUtami123 Please try below steps:

1. Create a new Aggregated-Ethernet Interface , ex: ae1

2. Select the ethernet interface you would like to remap to ae, click on "remap" and select "ae1" , if there is subinterface on the original ethernet interface , it will auto remap to ae subinterface, ae1.x

The other option is you can manually create Interfaces in firewall or Panorama template.

Re: creating aggregate interface with expedition

KartikaUtami123 — Thu, 31 Mar 2022 03:53:07 GMT

Hi Lychiang,

So I managed to create an aggregate interface by selecting 2 interfaces and add them to aggregate-etherhet.

Is there a way in expedition to create sub-interfaces of the aggregate-ethernet?

There is no existing sub-interface in the original ASA configuration.

Re: creating aggregate interface with expedition

lychiang — Thu, 31 Mar 2022 15:49:46 GMT

@KartikaUtami123 If you are changing network interface design like this , I would suggest you export the config out and load it onto firewall , then make modification there .

Re: creating aggregate interface with expedition

Agio-Networks — Fri, 02 Jun 2023 14:17:27 GMT

I was able to do this by updating the old G0/0 interface in expedition and adding the subinterface and tag to G0/0 then map it to my AE2, then it added to AE2.4. Boom.