topic Cisco ASA VTI not importing ipsec or gateway info in Expedition Discussions

Cisco ASA VTI not importing ipsec or gateway info

jjsimpson — Mon, 04 Apr 2022 16:49:56 GMT

We have a healthy mix of VTI and Crypto Map tunnels on our firewalls and when checking the import, the policy maps are all there as expected (outside of the naming). However the VTIs only show up as tunnel interfaces with no IPSec tunnel or IKE Gateway association.

Does Expedition support migrating VTI ipsec tunnels to the equivalent Palo config? This seems as though it should be pretty straightforward and included since the config is only slightly different between the two.

Am I missing something, is this a known issue, or is this transition simply not supported?

Re: Cisco ASA VTI not importing ipsec or gateway info

lychiang — Mon, 04 Apr 2022 17:08:31 GMT

@jjsimpson You should be able to view your migrated ipsec tunnel configuration in below page:

Re: Cisco ASA VTI not importing ipsec or gateway info

jjsimpson — Mon, 04 Apr 2022 17:44:31 GMT

When I look at the imported VPN configs, the only VPN tunnels I see there are the policy map tunnels.

Under Interfaces, I see both the VTI and policy map configs:

tunnel.100 is a VTI interface

tunnel.4 is a policy map interface

the IPsec tunnel for tun.4 exists

but the last configured tunnel is for tun.42, which is also a policy map

So it appears that the tunnel-group and group-policy ASA settings are not being imported for VTIs as they are for the policy maps.