topic Re: Importing an SRX config in Expedition Discussions

Importing an SRX config

LCMember1499 — Tue, 29 Nov 2022 15:29:23 GMT

Having imported an SRX config to Expedition, we appear to have rendered all the st0.x 'secure tunnel interfaces' in the SRX config as 'tunnel.x' in the interface section of the config but, in the virtaul router, static routes continue to reference to st0.x.
Is that what we expect ?
Simply a matter of re-wriiting the static routes ?

Re: Importing an SRX config

lychiang — Tue, 29 Nov 2022 17:10:18 GMT

@LCMember1499 Can you please advise what version of the expedition you have ? If the interface changed name , the static route reference the interface should change as well.

Re: Importing an SRX config

LCMember1499 — Tue, 29 Nov 2022 17:20:06 GMT

Expedition is running 1.2.44

Re: Importing an SRX config

lychiang — Tue, 29 Nov 2022 18:26:26 GMT

Hi @LCMember1499 We will need to see the original juniper config for further investigate, if you could share the config , please open a TAC case and write to fwmigrate@paloaltonetworks.com the case# . Thank you!

Re: Importing an SRX config

LCMember1499 — Wed, 30 Nov 2022 16:38:48 GMT

Will do.
Thanks.

Re: Importing an SRX config

LCMember1499 — Fri, 02 Dec 2022 14:50:01 GMT

I have raised CASE 02395826 with PA TAC and have uploaded the SRX Config to it.

Re: Importing an SRX config

LCMember1499 — Mon, 12 Dec 2022 10:49:09 GMT

Just to advise that the upgrade to Expedition v1.2.46 fixes the issue, translating static routes from the SRX config.
Thanks.