topic Re: PA3430 missing from the Expedition device models in Expedition Discussions

PA3430 missing from the Expedition device models

SeanPurvis — Thu, 15 Dec 2022 20:48:33 GMT

I'm using the expedition v.1.2.47. I'm trying to add a PA3430, but this model is not available from the drop down list for devices.

Is v. 1.2.47 the latest? I just installed this version today per the installation guide.

Re: PA3430 missing from the Expedition device models

lychiang — Thu, 15 Dec 2022 23:02:05 GMT

@SeanPurvis The model type is cosmetic, you can select any PA3200 model should work.

Re: PA3430 missing from the Expedition device models

SeanPurvis — Tue, 20 Dec 2022 13:14:10 GMT

Maybe I'm misunderstanding how this should work? I have a 5220 series and we are replacing it with a 3430 series. I was going to upload the config for the 5220 and convert the config to work with a 3430. The interfaces on a 3200 series is different for a 3400 series. So I did not think it would work the way I wanted it too. I ended up exporting the 5220 config as an XML and editing it and then uploaded it to the 3430. That seemed to work and the config from the 5220 did upload to the 3430 successfully. Do you think I should be good? Thanks for your help!

Re: PA3430 missing from the Expedition device models

lychiang — Tue, 20 Dec 2022 17:45:04 GMT

@SeanPurvis Yes, for Palo Alto Network firewall toPalo Alto Network firewall migration, you do not need to use expedition, you can load the config directly.