topic Re: Not able to see all ASA firewall interfaces on Expedition tool in Expedition Discussions

Not able to see all ASA firewall interfaces on Expedition tool

Bkrishnamoorthy — Mon, 17 Apr 2023 08:38:15 GMT

We are planning to migrate Cisco ASA firewalls to Palo Alto, as part of it we are converting the configurations using Expedition tool, but while i check on Network section for the firewall interface, i can see only port channel interfaces but not seeing the physical interfaces are part of that port-channel group. Do i need to manually create physical interfaces and add them as part of aggregate interfaces?

Re: Not able to see all ASA firewall interfaces on Expedition tool

lychiang — Mon, 17 Apr 2023 16:05:20 GMT

Hi @Bkrishnamoorthy You can remap port-channel to aggregate ethernet interface , for example, click port-channel interface -> click "remap interface name " , scroll to the bottom of the dropdown to select "ae1" , that way it will map the port-channel to ae1 :

then you add the new ethernet interface , for example "ethernet1/1", change the type to Aggregate Ethernet , and select group "ae1" , this will assign ethernet interface to the Aggregate Ethernet Group "ae1"

Re: Not able to see all ASA firewall interfaces on Expedition tool

Bkrishnamoorthy — Mon, 24 Apr 2023 13:47:50 GMT

@lychiang It helped to discovered the interfaces as required , thanks for your solution.