topic Re: Base Configuration[Output] empty in Expedition Discussions

Base Configuration[Output] empty

DanielEsbach — Fri, 18 Aug 2023 12:26:53 GMT

Hello,

i am running an Expedition 1.2.71 intalled on an ubuntu vm. the whole installation followed the instructions.

strangely enough i can't select a device when exporting the config. the whole window is empty

I have created the device, imported the configuration and created the project.

I have done all the steps as described in the youtube guide. I just have no way to merge the two configurations.

Someone an idea?

Greetings,

Daniel

Re: Base Configuration[Output] empty

lychiang — Fri, 18 Aug 2023 14:49:20 GMT

@DanielEsbach , please expand the down arrow right located left of the base config folder, you should see folder structure of the configuration file. Sam thing on the left side, you should see folder structure of the source config. Merged is between 3rd party vendor and PAN-OS only

Re: Base Configuration[Output] empty

DanielEsbach — Fri, 18 Aug 2023 15:04:52 GMT

Thanks for your reply. On the left side the Cisco ASA Config is there. On the right side should be the palo conifg three. But unfortunately the field is empty.

Re: Base Configuration[Output] empty

lychiang — Fri, 18 Aug 2023 15:15:28 GMT

When you import the pan-os config , did you retrieve the whole running config from the device , and in the import tab, click on the device to import the config ? After the import , you should see objects and policy under the config name . If you are not seeing the objects and policy that means it's not imported.

Re: Base Configuration[Output] empty

DanielEsbach — Mon, 21 Aug 2023 04:45:45 GMT

thank you very much. that was it. I had forgotten to press the palo after creating the project. i had only imported the cisco asa config.