Importing (Cisco) switch configuration to Expedition

santonic — Thu, 08 Aug 2024 05:51:34 GMT

Hello.

I need to migrate switch (Cisco 9500, version 17,12) to PA firewall. I tried importing config into Expedition but i didn't get any rules nor L3 interfaces. All layer 3 configuration is on VLAN interfaces, ACLs are attached to this VLAN interfaces.

Example:

interface Vlan21
ip address 10.x.y.252 255.255.255.0
ip helper-address 10.x.y.35
ip directed-broadcast 101
ip access-group USERS in
standby 21 ip 10.x.y.254
standby 21 priority 110
standby 21 preempt
standby 21 authentication md5 key-string 7 aaaa timeout 30
!

Is it possible to use Expedition for this? Would any changes in exported configuration make this work?

Any help would be greatly appreciated.

Re: Importing (Cisco) switch configuration to Expedition

lychiang — Thu, 08 Aug 2024 15:35:02 GMT

@santonic Expedition only support layer 3 interface migration, also only support asa syntax.

topic Importing (Cisco) switch configuration to Expedition in Expedition Discussions

Importing (Cisco) switch configuration to Expedition

Re: Importing (Cisco) switch configuration to Expedition