topic Generated config file does not contain the expected data after merging in Expedition Discussions

Generated config file does not contain the expected data after merging

mkukucska — Fri, 10 Jan 2025 12:25:08 GMT

Hi,

I upgraded Expedition tool to 1.2.102 and encountered a symptom I hadn't experienced before. I'm about to migrate an ASA config to a Palo Alto config, and everything seems to be going fine until generating the merged configuration. All the merged data is visible on the Expedition surface, but after generating the files, it contains only the base config. Do you have any suggestions for what might be causing this issue?

Regards,

Mihaly

Re: Generated config file does not contain the expected data after merging

dpuigdomenec — Fri, 10 Jan 2025 13:55:15 GMT

Hi @mkukucska

Please could you confirm you executed all steps defined in the above video

https://www.youtube.com/watch?v=RMHfO4MA0jw&list=PLD6FJ8WNiIqVez8EBeoyRsnQcKTA5FuZ-&index=8

Also could you check the file /tmp/error for any error output.

Thanks,

David

Re: Generated config file does not contain the expected data after merging

mkukucska — Mon, 13 Jan 2025 08:31:31 GMT

Hi,

Thank you for reflecting my issue. However, this was caused by improper input files. Even though the merging seemed to be succesfull, generating the new config did not work with those two config files, I was working with. I tried with another one, and everything is working with this one.

Regards,

Mihaly