Import of ASA config stuck at ‘Fixing rules based on Destination Nats”….

cheumoua — Tue, 16 Oct 2018 19:14:02 GMT

Expedition 1.0.105 ASA 9.1.7(29)

Importing ASA config via pasting or browsing local computer gets stuck at ‘Fixing rules based on Destination Nats”.

Rules/configs/etc seem to load when i check them on Expedition, but i am worried about completeness/integrity because the import process never really completes.

Also on the Projects Library, my project is listed - but no 'vendor' count is on available vendors (all are zeroes).

Note: I did have to create /datastore and do a chown on it (for parquet unit) , and did have to enable msql reconnects on apache and cli. These were recommended remediation steps provided by the support community and Expedition gui.

Re: Import of ASA config stuck at ‘Fixing rules based on Destination Nats”….

cheumoua — Wed, 17 Oct 2018 20:19:26 GMT

Thanks to alestevez! Issue resovled for me..... alestevez informed references to IPV6 is not supported by the tool... so i removed IPV6 components (addresses, any6, etc). This allowed the import to complete. I will add IPV6 info back manually on the Palo side.

topic Import of ASA config stuck at ‘Fixing rules based on Destination Nats”…. in Expedition Discussions

Import of ASA config stuck at ‘Fixing rules based on Destination Nats”….

Re: Import of ASA config stuck at ‘Fixing rules based on Destination Nats”….