Expedition 1.2.48 Hotfix Information

dpuigdomenec — Fri, 23 Dec 2022 16:22:18 GMT

Version 1.2.48 (Date Dec 23, 2022)

	INFORMATION
Link	https://conversionupdates.paloaltonetworks.com/expedition-updates/expedition_1.2.48.all.deb
sha1sum	15f02fcb168d1f58a66335b3b793696ca1806973
apt update	sudo apt-get update; sudo apt-get install expedition-beta
manual update	cd /tmp; wget https://conversionupdates.paloaltonetworks.com/expedition-updates/expedition_1.2.48.all.deb; sudo dpkg -i expedition_1.2.48.all.deb;

CHANGELOG

[MT-2513] - APP-ID Adoptions on v10.2.x and v11.0.x stuck at generating report. Using GET API method instead of PUT.
[MT-2523] - Avoid showing twice 'shared' vsys on the dropdown menu
[MT-2526] - Expedition is not removing the Panorama devices once they are imported, even if they are removed from Panorama
[MT-2528] - Merge by name (on address group) is not working as expected
[MT-2516] - CISCO ASA - DNAT Sec Rule was not created due to service mismatch between the sec and NAT rule.
[MT-2525] - Juniper SRX - Tunnel interface is not updated in the zones
[MT-2527] - Juniper SRX - Cloning NAT policy when it has more than one TO destination zone
[MT-2530] - CHECKPOINT R80+. Interfaces and static routes creation change.
- Interfaces and their addresses are created from the gateway definition (inside the .gz file).
- Statics routes are created from the provided route file (optional file).