PA500 not being powered on for years refuses to boot...

LCMember4427 — Tue, 12 Sep 2023 19:04:37 GMT

Hi,

The other day I powered up our #PA500 which has been stoiwed away for some years. I was able to do a factory reset by using CLI via the serial port

However unortunately it refuses to boot correctly, yelling about not being able to start or activate the data plane.

I have attached the CLI DMESG log and various screenshots from logfiles and status messages during boot.

I would be VERY grateful if someone here could advise me where to look and/or what to remedy in order to track down the culprit and have the #PA500 box working again.

best regards from Norway

Tor Tveitane

topic PA500 not being powered on for years refuses to boot... in Next-Generation Firewall Discussions

PA500 not being powered on for years refuses to boot...