https://live.paloaltonetworks.com/t5/next-generation-firewall/monitoring-subinterfaces-with-zabbix/m-p/579762#M2779 <P>I would like to ask if you have experience with integrating Zabbix and Palo Alto FW. I have an issue with graphs traffic on subinterfaces as it is not accurate compared to the port connected on the other end. For example, on the switch port, I see 20Mbps traffic in, but on the Palo Alto interface connected to that same switch, I see 1.2Mbps traffic out or other measurements that do not match.</P> <P>&nbsp;</P> <P>The strange thing happens when graphing the physical interface; these measurements are much closer to reality. Therefore, it seems that there is a problem when graphing subinterfaces.</P> <P>&nbsp;</P> <P>The FW is a&nbsp;PA-3220 with this SW 10.2.7-h3</P> <P>&nbsp;</P> <P>Thanks</P> Fri, 08 Mar 2024 05:24:38 GMT inglpa 2024-03-08T05:24:38Z https://live.paloaltonetworks.com/t5/next-generation-firewall/monitoring-subinterfaces-with-zabbix/m-p/579762#M2779 <P>I would like to ask if you have experience with integrating Zabbix and Palo Alto FW. I have an issue with graphs traffic on subinterfaces as it is not accurate compared to the port connected on the other end. For example, on the switch port, I see 20Mbps traffic in, but on the Palo Alto interface connected to that same switch, I see 1.2Mbps traffic out or other measurements that do not match.</P> <P>&nbsp;</P> <P>The strange thing happens when graphing the physical interface; these measurements are much closer to reality. Therefore, it seems that there is a problem when graphing subinterfaces.</P> <P>&nbsp;</P> <P>The FW is a&nbsp;PA-3220 with this SW 10.2.7-h3</P> <P>&nbsp;</P> <P>Thanks</P> Fri, 08 Mar 2024 05:24:38 GMT https://live.paloaltonetworks.com/t5/next-generation-firewall/monitoring-subinterfaces-with-zabbix/m-p/579762#M2779 inglpa 2024-03-08T05:24:38Z