topic BGP on 3220 series in Next-Generation Firewall Discussions

BGP on 3220 series

S.Byrne — Tue, 05 Nov 2024 09:03:03 GMT

hello all

I am working on a BGP configuration on a HA 3220 series install

the BGP status is staying at connect not establish

I enabled BGP on the IP addresses inbound /outbound -- no hits on the policy

Q are there show commands or debugs that can help me determine what the issue is ?

many thanks

PavelK — Tue, 05 Nov 2024 21:41:57 GMT

thanks for post.

If the peer status is stuck in "connect" state, then this BGP peer was likely not able to complete TCP 3-way handshake. Could you check below steps:

- If you configured policy with application BGP, try to replace it with service TCP 179.

- Check whether update source IP address and peering IP address is correct on both sides of devices peering with each other.

- Check logs from CLI: less mp-log routing.log for more details.

Kind Regards

Pavel

S.Byrne — Thu, 14 Nov 2024 12:41:52 GMT

many thanks