Configuration for GUI access through public IP

dilsarahm2 — Fri, 07 Mar 2025 05:56:29 GMT

Hello all,

I'm new to the Palo Alto firewalls and pardon me for my bad English as I'm not a native English speaker.

I'm trying to build the below network we currently have in my workplace in an eve-ng lab.

I'm not able to access the GUI through the address of eth 0/0 HQ_ISP address (203.189.70.2) with my current config. I have configured a Management profile with http, https, ping, ssh and assigned it to the eth 1/1 of the Palo. I have configured port forwarding on the HQ_ISP router like this ip nat inside source static 172.31.0.10 203.189.70.2

Windows host is able to ping 203.189.70.2 address and I have configured the NAT on HQ_ISP and BR_1_ISP routers translating internal 172.31.0.0/24 and 172.31.1.0/24 network to the public address of HQ_ISP and BR_1_ISP routers.

Please tell me where I've gone wrong. Any help would be greatly appreciated. Thanks a lot.

topic Configuration for GUI access through public IP in Next-Generation Firewall Discussions

Configuration for GUI access through public IP