IPSec Tunnels acting Strange

BTS_MS — Tue, 18 Mar 2025 09:36:28 GMT

Version 11.1.4-h7

I am unsure if anyone else has experienced this. We are seeing IPSec tunnels suddenly showing errors in the system logs that IKE phases are just deleting one right after the other and not initializing. Originally one of the tunnels actually went down and caused some issues, but it was able to be fixed via the test commands to reset the tunnels. After checking both sides of the tunnel, the configuration timing was changes to 4 hours for both Phase 1 and 2 to match the other end, as they were originally different on each end. We are still seeing partially the issue. IKE info turns red and stops showing, logs show again that the tunnel is deleting and not initializing properly. The tunnel is up in CLI and traffic is flowing, there is no outage being recorded. Not sure if this happens to be a bug or a configuration issue.

Any advise would go a long way.

Thanks.

topic IPSec Tunnels acting Strange in Next-Generation Firewall Discussions

IPSec Tunnels acting Strange