Step by Step Radius Configuration for PA-1410

Mokhairy — Sun, 10 Aug 2025 13:31:07 GMT

Dear Everybody,

I have a problem in configuring Radius on PaloAlto Firewall 1410 series , I find different manual for different methods as below :

Configuring Administrator Authentication with Windows 2008 RADI... - Knowledge Base - Palo Alto Networks

How To Configure RADIUS Server Profile and Add it to an Authent... - Knowledge Base - Palo Alto Networks

Configure RADIUS Authentication

LIVEcommunity - Radius Authentication and NPS - LIVEcommunity - 575326

I have tried all the above methods, but still, authentication fails. Please note this firewall is connected to FortiGate Firewall point-to-point connection, but I can reach this interface IP. and I have configured it in the policy ihave also tried to service route to this interface as mentioned here https://dorian5.medium.com/palo-alto-networks-pa-410-radius-authentication-lab-627b73bdb8fe with no luck. any advsie

I want a detailed step-by-step guide to configure both NPS server settings and PaloAlto settings for Radius (No certificate is used at the moment)

I have Windows Server 2022 with an NPS rule installed

Re: Step by Step Radius Configuration for PA-1410

PavelK — Tue, 19 Aug 2025 03:40:09 GMT

Hello @Mokhairy

unfortunately, as of now there is no official up to date setup guide / knowledge base for Radius setup with Windows Server 2022. Are you able to see your failing authentication session in Firewall logs: less mp-log authd.log? This would be starting point for troubleshooting.

Kind Regards

Pavel

topic Step by Step Radius Configuration for PA-1410 in Next-Generation Firewall Discussions

Step by Step Radius Configuration for PA-1410

Re: Step by Step Radius Configuration for PA-1410