topic Re: SCM management routing mode change failed in Next-Generation Firewall Discussions

SCM management routing mode change failed

J.Turcotte — Mon, 28 Apr 2025 16:28:36 GMT

Hi,

I’m trying to manage PA-460 from SCM, but I still get error, even after a factory reset.

The firewall still disconnects and cannot complete bootsrap process, but SCM receive telemetry data. I also try to change [routing mode] to advanced routing, same result.

PAN OS version is 11.1.6-h3 (preferred)

Strata cloud management essential

No strata logging service

Re: SCM management routing mode change failed

Ravi_Jadav — Wed, 03 Sep 2025 13:18:44 GMT

Could you please check whether Advanced Routing is enabled on the firewall?

You can verify this by navigating to:
Device >> Setup >> Management >> Advanced Routing

If it is not enabled, kindly enable it and recheck the services.

Re: SCM management routing mode change failed

skchakraborty — Mon, 22 Sep 2025 08:12:02 GMT

Hi,
I'm facing same problem, I've enabled Advanced Routing , still same error.

Any other work around?