topic Template issue in Panorama Discussions

Template issue

dmpeter — Wed, 05 Apr 2023 13:52:18 GMT

I am trying to configure the DHCP server for 3 of our devices through Panorama. When doing the add and selecting the interface only one interface shows of the 3 devices. We have 3 devices. Denver, Omaha and Atlanta. The Denver FW shows the interface and when I am on that FW it has the green wheel saying it is from the denver-stack. The other 2 FW's do not show the interface and do not have the green wheel. We do push rules to all of these FW's without any issues and the template is up to date. I would like to configure the DHCP through Panorama instead of doing this on each of the FW's. I do see an article about this but i am unable to sign into the knowledge base for some reason, i have access to everything. We are running version 10.1.6-h6.

Thanks.

Re: Template issue

Raido_Rattameister — Wed, 05 Apr 2023 14:22:11 GMT

If interface in firewall don't have "green wheel" then it means this config was done locally and was not pushed from Panorama.

Seems like your config is not 100% coming from Panorama.

Re: Template issue

dmpeter — Wed, 05 Apr 2023 14:27:11 GMT

Thanks. That is what i figured but was just hoping it was something else instead of re-creating interfaces in Pano and pushing back through the template.