https://live.paloaltonetworks.com/t5/panorama-discussions/managed-logcollector/m-p/583334#M2272 <P>Dear All,&nbsp;</P> <P>I have Panorama M-300 with Maximum HDD capacity of RAID 16TB [4X4 TB]. And We do not have a dedicated log collector.</P> <P>Since it's a new installation when I check the RAID status Disk A and Disk B pair not in use. Also in the Managed Collectors I am seeing Out-Of-sync and IP address mismatch and unknown. I assume Do we need to give the Panorama Management IP address on the Ethernet 1/1 interface. If yes in this case we going to use only Management Interface on which managed firewalls will forward the logs?</P> <P>And if we change the eth1/1 interface IP will it impact the Management traffic as both interface has same IP address? I am little confuse. Can some one help me out on this?</P> <P>&nbsp;</P> <P>Regards,</P> <P><STRONG>Ram</STRONG></P> <P>&nbsp;</P> Thu, 11 Apr 2024 06:02:15 GMT Ramakrishnan 2024-04-11T06:02:15Z https://live.paloaltonetworks.com/t5/panorama-discussions/managed-logcollector/m-p/583334#M2272 <P>Dear All,&nbsp;</P> <P>I have Panorama M-300 with Maximum HDD capacity of RAID 16TB [4X4 TB]. And We do not have a dedicated log collector.</P> <P>Since it's a new installation when I check the RAID status Disk A and Disk B pair not in use. Also in the Managed Collectors I am seeing Out-Of-sync and IP address mismatch and unknown. I assume Do we need to give the Panorama Management IP address on the Ethernet 1/1 interface. If yes in this case we going to use only Management Interface on which managed firewalls will forward the logs?</P> <P>And if we change the eth1/1 interface IP will it impact the Management traffic as both interface has same IP address? I am little confuse. Can some one help me out on this?</P> <P>&nbsp;</P> <P>Regards,</P> <P><STRONG>Ram</STRONG></P> <P>&nbsp;</P> Thu, 11 Apr 2024 06:02:15 GMT https://live.paloaltonetworks.com/t5/panorama-discussions/managed-logcollector/m-p/583334#M2272 Ramakrishnan 2024-04-11T06:02:15Z