topic Template not being pushed to new devices in Panorama Discussions

Template not being pushed to new devices

M.Allen — Tue, 23 Apr 2024 10:23:59 GMT

Hi,

I have added some new firewalls to Panorama and would like to deploy templates to them. I added them to the correct device groups and stacks and saved on Panorama.

When I click push to devices I am getting a lot of errors as seen below..

Why are the new firewalls not being configured with the template configs?

These new firewalls are replacing the old ones so I have replicated the current device group and templates.

Re: Template not being pushed to new devices

M.Allen — Tue, 23 Apr 2024 11:25:34 GMT

I have added the devices to the correct groups and committed to panorama. Do I then need to push the device group to the Palos before applying templates?

When attempting to push device groups to the Palo's it fails..

Here is the fail to push device group details

Also once the above is sorted do I then define the template stacks for each firewall.. when does the shared policy sync?

Re: Template not being pushed to new devices

CosminM — Tue, 23 Apr 2024 14:23:03 GMT

Hi @M.Allen

When you are pushing template config to your firewall, in security zone configuration you are using a log-forwarding profile called "default" that doesn't exist yet on your new firewalls.

The log-forwarding profiles are part of Device Groups.

To mitigate the template push error, you have two options:

eliminate from template zone config the log settings
or on each firewall to create a log-forwarding profile called "default" and at the end when you finish to push also the device group (that for sure include a log-forwarding profile called) go back to each firewall and delete the local created log-forwarding profile