topic Re: Errors after deploying template from Panorama in Panorama Discussions

Errors after deploying template from Panorama

M.Allen — Tue, 23 Apr 2024 15:27:51 GMT

Hi all,

I am seeing the below errors after deploying templates to Palo's when attempting to commit HA configuration.

I have applied the HA IP so unsure why that is stating ip-address to be configured?

Also what is best way to resolve these dynamic list no cert with profile errors?

Re: Errors after deploying template from Panorama

M.Allen — Tue, 23 Apr 2024 15:40:13 GMT

Just seen the older Palo which I am attempting to rebuild is using Aux for HA.. I am unable to create aux ports within device > interfaces...

below is the old firewall

below is the new firewall

How do I create the required aux interfaces? Does hardware need to be in the firewall before they show?

Re: Errors after deploying template from Panorama

CosminM — Tue, 23 Apr 2024 18:01:51 GMT

Hello @M.Allen

First you are looking in two different places. The first image with AUX's interfaces it's from Panorama (Template > Device > Setup > Interfaces) and the second image without AUX it's from firewall GUI (Device > Setup > Interfaces).

The AUX's interfaces are used only when you are configuring a PA-5200 series firewall from Panorama.

https://docs.paloaltonetworks.com/hardware/pa-5200-hardware-reference/pa-5200-series-firewall-overview/pa-5200-front-panel

The PA-5200 series are End-of-Sales by now.

https://www.paloaltonetworks.com/services/support/end-of-life-announcements/hardware-end-of-life-dates