Migrating Configuration from Panorama/PA-3220 (PAN-OS 9.1.6) to New Panorama/PA-1410 (PAN-OS 11.1.2-h3)

Tutchapon — Wed, 07 Aug 2024 16:05:03 GMT

Hi all,

I'm planning to replace my existing Panorama VM and PA-3220 firewall (both running PAN-OS 9.1.6) with a new Panorama VM and PA-1410 (running PAN-OS 11.1.2-h3). My goal is to migrate the existing configuration to the new setup, primarily focusing on the PA-1410, and eventually decommission the PA-3220 without connecting it to the new Panorama VM.

My main concerns are:

What's the best way to adapt the PA-3220's configuration for the PA-1410, considering they have different PAN-OS versions and potentially different hardware capabilities?
Are there any specific guidelines or tools to help with the manual integration of the PA-3220's configuration into the new Panorama?
What are some common pitfalls or challenges I might encounter during this migration process, and how can I mitigate them?

Any advice or insights would be greatly appreciated!

Re: Migrating Configuration from Panorama/PA-3220 (PAN-OS 9.1.6) to New Panorama/PA-1410 (PAN-OS 11.1.2-h3)

aleksandar.astardzhiev — Fri, 09 Aug 2024 13:59:57 GMT

Hi @Tutchapon ,

You may want to explore the Expedition tool - https://live.paloaltonetworks.com/t5/expedition/ct-p/migration_tool

I have used used long long ago for migration from other FW vendors to Palo Alto, but it should also be able to assist you with migrating from one hardware to another. Please note the following EoL announcment - https://live.paloaltonetworks.com/t5/expedition-articles/important-update-end-of-life-announcement-for-palo-alto-networks/ta-p/589642

Does your PA-3220 config is entireply pushed from Panorama, or there is some local config?

My suggestion would be:

1. Export complete Panorama configuration (with device config)

2. Create new Panorama running the same OS version and import the backup. (Disconnect the PA-3220, so the new Panorama does not try to communicate with it. Although communication is always initiated from FW to Panorama)

3. Upgrade the new Panorama to the target version following upgrade path to ensure config is migrated properly

4. Attach the new 1410 to the new Panorama and assign the existing Device Group and Templates for old PA-3220. You probably will need to adjust the network interfaces, before pushing the config to the device.

topic Migrating Configuration from Panorama/PA-3220 (PAN-OS 9.1.6) to New Panorama/PA-1410 (PAN-OS 11.1.2-h3) in Panorama Discussions

Migrating Configuration from Panorama/PA-3220 (PAN-OS 9.1.6) to New Panorama/PA-1410 (PAN-OS 11.1.2-h3)

Re: Migrating Configuration from Panorama/PA-3220 (PAN-OS 9.1.6) to New Panorama/PA-1410 (PAN-OS 11.1.2-h3)