Panorama GUI unresponsive

Ridwaan — Tue, 15 Sep 2026 11:00:27 GMT

Good day All ,

I am currently unable to access the GUI of a Panorama , after further investigation I have found the below(show system software status) :

Process dlsrvr stopped (pid: -1) - Exit Code: 1

Process websrvr stopped (pid: -1) - Exit Code: 1

I followed on to checking the disk-space and found root at 100% :

Panorama> show system disk-space

Filesystem Size Used Avail Use% Mounted on

/dev/root 7.9G 7.9G 0 100% /

none 32G 100K 32G 1% /dev

/dev/sda5 24G 12G 12G 49% /opt/pancfg

/dev/sda6 5.9G 2.3G 3.4G 41% /opt/panrepo

tmpfs 32G 131M 32G 1% /dev/shm

cgroup_root 32G 0 32G 0% /cgroup

/dev/sda8 32G 18G 13G 60% /opt/panlogs

/dev/loop0 13G 888M 11G 8% /opt/mongobuffer

tmpfs 12M 32K 12M 1% /opt/pancfg/mgmt/ssl/private

tmpfs 32M 0 32M 0% /mnt/pantmp

I then progressed to cleaning up space , with no luck :

Panorama> debug software disk-usage cleanup threshold 95

Root partition size is 100%

Panorama> debug software disk-usage cleanup deep threshold 94

Root partition size is 100%

Panorama> debug software disk-usage cleanup deep threshold 90

Root partition size is 100%

I have also confirmed that aggressive cleaning is enabled :
Panorama> show system state | match aggressive-cleaning

cfg.debug-sw-du.config: { 'aggressive-cleaning': True, }

Is there anything I am missing ? Please share your thoughts, thank you in advance.

Re: Panorama GUI unresponsive

reaper — Wed, 16 Sep 2026 09:48:49 GMT

Have you checked if there aren't any core files that are hogging space?

> show system files

you can delete those:

> delete core management-plane file <filename or *>

if all else fails, open a support case so TAC can root into your system and wipe some 'stuff' to free up space

topic Re: Panorama GUI unresponsive in Panorama Discussions

Panorama GUI unresponsive

Re: Panorama GUI unresponsive