topic VR Configuration for Tunnel not pushing in Panorama Discussions

VR Configuration for Tunnel not pushing

SubaMuthuram — Fri, 25 Feb 2022 06:21:13 GMT

Hi Team,

When I tried to create a tunnel interface from Panorama to push to the Managed device, But after the push the VR configuration is not reflected in the Managed device the VR showing none.

But when I check in panorama the interface it properly attached with a VR and showing properly,

There is no Commit error, We tried to create a new interface and same issue.

Please help me resolve this issue.

Re: VR Configuration for Tunnel not pushing

PavelK — Fri, 25 Feb 2022 12:43:56 GMT

Thank you for the post @SubaMuthuram

is the Template where you configured VR located in the correct Template Stack? Could you check on managed Firewall side in the configuration log under: Monitor > Logs > Configuration whether there has been log from Panorama with "commit-all"?

Kind Regards

Pavel

Re: VR Configuration for Tunnel not pushing

SubaMuthuram — Mon, 28 Feb 2022 06:42:02 GMT

Hi,

I have override the Panorama configurations in the firewall for Zone and Virtual Routers that is the reason whenever I added a interface into the VR it is showing none in Firewall, I have reverted the overridden Configurations in the firewall and it is working as expected.