topic Re: VM sdb drive shows 1.7TB in CLI and not seen in GUI for Panorama in Panorama Discussions

VM sdb drive shows 1.7TB in CLI and not seen in GUI for Panorama

Jim007 — Wed, 08 Jun 2022 19:44:07 GMT

Hi,

We are trying to rebuild our Panorama instances that did a hard crash we could not recover from using 10.1.5h1. We started with a 10.0 ova file and then upgraded to 10.1 and then 10.1.5h2. When we tried to commit the snapshot we saved from the secondary we noticed that it failed because there we only 13GB of disk space for logs. The CLI showed the 2TB log disk, sdb, as only having 1.7TB available. But not even the 1.7TB showed up in the GUI . We tried disk sizes of 2049GB (to match the secondary), 2048GB and 2512GB. But the sdb drive keeps show up as 1.7TB in the CLI and invisible in the GUI (setup, mgmt, logging and reporting window). With the slow response of Palo support right now I thought I would post it here to see if anyone else has run into the same issue.

Thanks, Jim from the Lone Star State.

Re: VM sdb drive shows 1.7TB in CLI and not seen in GUI for Panorama

Jim007 — Wed, 08 Jun 2022 20:24:07 GMT

Updating my findings as I go along. Noticed that our recovery build we started with the 10.0 ova is starting in Panorama mode versus the legacy mode that the upgraded from 8>9>10 secondary is in. Going to start over with a 9.x ova and see if we can get it legacy mode.

Re: VM sdb drive shows 1.7TB in CLI and not seen in GUI for Panorama

Jim007 — Mon, 13 Jun 2022 14:16:20 GMT

All the OVA versions we tried started in Panorama mode. Waiting on tech support to tell us how to get to legacy mode.

Re: VM sdb drive shows 1.7TB in CLI and not seen in GUI for Panorama

wthorne — Mon, 26 Feb 2024 19:17:56 GMT

What was the outcome?