SNMP Monitoring - Missing Data

f1r3withf1r3 — Wed, 22 Nov 2017 18:43:17 GMT

Hi all,

I'm currently working on developing SNMP v3 reporting with data from my PA-3020's and Panorama.

While I can successful authenticate commands against each of my desired devices, I am not seeing any clearly available data that represents session data - counts, amount/sec, SSL or IPsec info.

In using MIB browsers, I did find certain values the MIBs translate to that appear to be what I want, for example in the PAN-COMMON-MIB (version 8):

panSessionUtilization

panSessionActive

panSessionActiveSslProxy

among others.

I can run the following command with the v8 MIBS on my machine, and get tons of output, but no values detailing session information from what I can tell:

snmpwalk -v 3 -u <username>-l authPriv -a SHA -A <auth> -x AES -X <priv> <palo device ip> -m ALL

or instead having PAN-COMMON-MIB after -m

This still leaves me without translated names, but running this command seems to translate them without issue:

snmpwalk -v 3 -u <username>-l authPriv -a SHA -A <auth> -x AES -X <priv> <palo device ip> iso.3.6.1.4.1.25461

Any ideas what's missing or what is causing the MIBs not to load properly with the first command?

topic SNMP Monitoring - Missing Data in Automation/API Discussions

SNMP Monitoring - Missing Data