Global Protect Satellite reconnect via API

erikj — Thu, 15 May 2014 16:57:08 GMT

Running PANOS 6.0.2

I'm trying to use the XML API to reconnect a Global Protect Satellite to the gateway but getting:

<response status="error" code="400">
<result>
<msg>Unsupported command.</msg>
</result>
</response>

My API call is:

https://192.168.19.10/api/?type=op&cmd=<test><global-protect-satellite><gateway-reconnect><satellite><name>GPTunnel</name></satellite></gateway-reconnect></global-protect-satellite></test>&key=XXXXXXXXX

To verify the GP satellite info I ran the following API call:

https://192.168.19.10/api/?type=op&cmd=<show><global-protect-satellite><satellite><name>GPTunnel</name></satellite></global-protect-satellite></show>&key=XXXXXXXXX

The results returned are:

<response status="success">
<result>
<entry>
<satellite>GPTunnel</satellite>
<portal-address>w.x.y.z</portal-address>
<reason>connection failed</reason>
<status-time>1400171499</status-time>
<current-failed-reason>connection failed</current-failed-reason>
<auth-needed>no</auth-needed>
<encap-interface>ethernet1/1</encap-interface>
<ip>a.a.a.a</ip>
<tunnel-interface>tunnel.999</tunnel-interface>
<publish-routes>
<member>b.b.b.b/24</member>
<member>c.c.c.c/24</member>
</publish-routes>
<publish-conn-routes>no</publish-conn-routes>
<cert-profile>certRoot</cert-profile>
<local-cert>ClientCert</local-cert>
</entry>
</result>
</response>

So... I think I'm missing something with the test operational command, any ideas?

topic Global Protect Satellite reconnect via API in Automation/API Discussions

Global Protect Satellite reconnect via API