topic Re: Using PowerAlto to create PA address and PA address group in General Topics

Using PowerAlto to create PA address and PA address group

Joe_Ng — Wed, 20 Oct 2021 02:35:33 GMT

Has anyone used this Powershell module to create IP address and Address groups? I require assistance on this.

Re: Using PowerAlto to create PA address and PA address group

LAYER_8 — Wed, 20 Oct 2021 17:03:54 GMT

Please see our guide on this here.

Re: Using PowerAlto to create PA address and PA address group

BPry — Wed, 20 Oct 2021 19:50:52 GMT

@Joe_Ng,

What exact issue are you running into, and have you actually read the docs? The docs for power alto has examples under Set-PaAddress and Set-PaAddressGroup that actually detail exactly how you would go about doing this. https://poweralto.com/

If you are hung up on something specific then please let us know so that we can assist with that particular issue, but PowerAlto is pretty well documented.

Re: Using PowerAlto to create PA address and PA address group

Joe_Ng — Tue, 23 Nov 2021 03:55:07 GMT

I have resolved the issue. Thank you so much for the response.