topic Re: QOS on tunnel interface in General Topics

QOS on tunnel interface

MRamadanAHafiez — Mon, 08 Nov 2021 11:33:18 GMT

Hello Bro,

We are in process to configure QOS rules to control SMB over VPN.

The tunnel interface can't be set as a destination interface, does that mean to use the interface that serving the tunnel?

if I use the interface as the destination interface I receive error states that "destinaton interface must be a subif".

SSL VPN configured on the interface tunnel.1

Any ideas on ow to configure this or links to help

TIA

Re: QOS on tunnel interface

Alpalo — Mon, 08 Nov 2021 11:39:47 GMT

Hello,

Take a look in this link:

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClS0CAK

Regards,

Re: QOS on tunnel interface

MRamadanAHafiez — Mon, 08 Nov 2021 13:04:20 GMT

I have seen this link, and my question arrised when I saw it that If I don't have set source and destination interfaces or not. because in my case the one of two ends are tunnel inteface ethernet 1/x "which the tunnel created in" and the other is subinterface.

Re: QOS on tunnel interface

OtakarKlier — Mon, 08 Nov 2021 21:57:22 GMT

Hello,

QoS is applied to the physical egress interface. So Apply QoS to the main physical interface and the sub interfaces also get the policy. i.e. Lets say I have 1/5 with sub interfaces 1/5.10 and 1/5/20. I would apply the QoS to interface 1/5.

I hope this clarifies things.

Regards,