topic Re: PAN Agent to FW connectivity in General Topics

PAN Agent to FW connectivity

rz185016 — Thu, 03 Oct 2013 08:45:49 GMT

Guys,

we have a PAN agent User-ID version 5 running on the network, all is working fine, but just that
on the PAN agent User ID, I see only one device PA-FW as connected.

The active one, and the standby does not show up.

Is this the right observation, or should I see both the PA-FW's on the PAN Agent.
Active and standby.

Please advise.

Regards,

Tau_

Re: PAN Agent to FW connectivity

Retired Member — Thu, 03 Oct 2013 08:51:02 GMT

Re: Why the User-ID Agent status of passive device on HA mode shows not-conn:idle?

Re: PAN Agent to FW connectivity

rz185016 — Thu, 03 Oct 2013 10:23:17 GMT

yes User-ID-Agent status on passive HA shows not-conn:idle.

Is this why it does not show the second HA on the user id.

So in case we fail, it should show the other PA-FW right.

Re: PAN Agent to FW connectivity

Retired Member — Thu, 03 Oct 2013 10:27:25 GMT

yes that is why it does not show the second HA on the user id

if failover happens it will show.