topic Vwire in General Topics

Vwire

Lakshmikanth — Thu, 23 Dec 2021 09:29:58 GMT

Vwire is introducing latency please help me. by using vwire we are observing 80 ms of latency.

Re: Vwire

PavelK — Sat, 25 Dec 2021 01:12:12 GMT

Thank you for the post @Lakshmikanth

Unfortunately, there are no specific debugs / diagnostics for vwire, so troubleshooting is limited. Have you tried to check basic things like duplex/errors/drops of interfaces configured for vwire from CLI: show interface <interface name> ?

Kind Regards

Pavel

Re: Vwire

MP18 — Sat, 25 Dec 2021 17:27:02 GMT

@Lakshmikanth

In addition to that also check speed on both sides of the connection.

Also make sure if PA is auto then other end is also auto.

Regards

Re: Vwire

BPry — Tue, 28 Dec 2021 18:28:44 GMT

@Lakshmikanth,

One thing that I would try right off the bat is removing any security profiles you may have assigned and creating a "any any" allow rule at the top of your security rulebase. With that rule active allowing all traffic to pass just going through App-ID, see if your latency goes away.

Since you didn't mention where you are actually seeing latency or among what type of traffic, this will see if it's possibly being caused by the firewalls inspection process or if it happens just from having the firewall in-line on the connection. If the latency goes away we'll know that the actual issue is actual inspection instead of simply having the firewall in-line on the traffic. V-Wire deployments without any security features enables shouldn't see a massive increase in latency like that, but it's possible that content inspection is introducing latency on some of your traffic.

Re: Vwire

Lakshmikanth — Tue, 03 Jan 2023 09:52:37 GMT

Sorry for my delayed response. Yes everything is set to perfect