Newbie: VPN on PanOS 10

peter_schmit — Sun, 16 Jan 2022 14:41:44 GMT

Hi everyone,

This is probably trivial, but I am fairly new to this so bear with me:

I would like to set up the PA firewall as a VPN server for users to connect to (ideally, using only the built-in windows client). After authentication they should have access to a couple of servers connected to a single network port on the firewall, but they should have no ability to connect to anything else on the network. Is this possible? If so, how would I go and configure it?

Thans,

Peter

Re: Newbie: VPN on PanOS 10

andrewl_coh — Sun, 16 Jan 2022 22:42:33 GMT

Hey Peter,

I recommending reviewing the documentation for GlobalProtect. This is Palo Alto's VPN solution for client connections. You will need to setup a GlobalProtect gateway and portal on the firewall which will allow clients to authenticate using the GlobalProtect client on their computers. From there you can create specific security policies to allow access to the servers you are hoping for. I have attached a few links for reference.

https://www.paloaltonetworks.com/products/globalprotect

https://docs.paloaltonetworks.com/globalprotect/8-1/globalprotect-admin/globalprotect-gateways/configure-a-globalprotect-gateway.html

topic Re: Newbie: VPN on PanOS 10 in General Topics

Newbie: VPN on PanOS 10

Re: Newbie: VPN on PanOS 10