topic Re: No QoS setting but from report show QoS setting in General Topics

No QoS setting but from report show QoS setting

JiaXiang — Thu, 10 Feb 2022 10:02:41 GMT

I do not have QoS configuration but from report showing some QoS setting. Anyone know why this will happen?

Re: No QoS setting but from report show QoS setting

aleksandar.astardzhiev — Wed, 16 Feb 2022 09:12:38 GMT

It looks like you have configured QoS profile under the "Physical Inteface" tab for Tunnel Interface:

As the above screenshot points out, on this tab you configure the default profile to be used for any traffic through this physical interace.

Using "Clear text Traffic" and "Tunnel Traffic" tabs you can configure specific QoS profiles if you have multiple sub-interfaces or multiple tunnel interfaces associated with this physical inteface. Any traffic that does not match settings under "Tunnel Traffic" or "Clear Text Traffic" tabs will use the default profile, defined under "Physical Interface" tab.

Re: No QoS setting but from report show QoS setting

JiaXiang — Thu, 17 Feb 2022 06:46:03 GMT

Thanks Astardzhiev, below is my QoS setting . Do you know where is the 400Mbps come from or where to check it?

Re: No QoS setting but from report show QoS setting

JiaXiang — Thu, 03 Mar 2022 06:21:25 GMT

I have asked PANW TAC about this and the explain are the total I have set is 1000Mbps for Class 1 to 3 i have reserve a Guaranteed Egress traffic (20%+20%+20%) total = 600Mbps. 1000- 600= 400Mbps so for the remaining interface doesn't have setting one will use the 400Mbps.